Is there any special skills needed to replace door jam?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Tips for updating or repairing Pella between the glass blinds?
Our 14 year old cord controlled blinds are all giving us trouble with raising and lowering and tilting. Many of the top mechanisms are coming unglued from the top. I ... See more
Brr! Drafty windows- how to cut the draft?
I have 3 sets of windows configured like this...very drafty, How to you winterize them? There is nothing in the corner to stick tape to. Thank you
No, just a will to learn, and a bunch of patience. Have you Googled yet or watched any utube videos?
It takes some skill to rehang a door in a jam, that is why they sell the jams with the doors installed already, its easier. There are lots of videos on YouTube, since you didn't state if its an interior or exterior door or what the problem is.... I'm giving you general link.... https://www.youtube.com/results?search_query=how+to+replace+a+door+jamb
wd40( it’s a slick oil spray) shaving your door down to fit in conjunction with the hardware.
There are really no special skills needed to install a door jamb. Your level will be your new best friend. Don't forget to purchase some shims when you purchase your lumber. Wishing you well.
Best done by a good handyman or with the guidance of a framing carpenter. If the door is in a weight-bearing wall, it's definitely a job for a pro!
so sorry--I get my words mixed up sometimes and was thinking of the door frame. The jamb will need some tweaking with shims and 2" screws, so go to a website or read a DIY book on the topic.
Yep shims, a level and I would use a cordless drill and screw it into the framing, if it’s paint grade, so if you don’t install it plumb and square , you can back out the screws and move it.