I am ready to finally paint my little girls room (the one in the photo<) but i had a few questions based off of my
-
Chezwhick on Jun 28, 20112. For some reasons occasionally the old paint sticks to the roller or brush and comes off the wall leaving an uneven gap/crack. i then have to let it dry fill it in and deal with the problem i mentioned above. its a vicious cycle and its the main reason why i have been hesitant to start this project. any advice?Helpful Reply
-
-
KMS Woodworks on Jun 28, 2011It sounds like you have some moisture infiltration and "flaking" issues....is this concrete wall a "poured" wall or Brick?. I would start with freeing up any loose material , brushing scrapping etc. The use a Concrete sealing paint like "drylock"...once that is cured fill gaps and cracks and apply the finish top coat of paint.Helpful Reply
-
-
Chezwhick on Jun 28, 2011im pretty sure its poured. im pretty confident moisture is not the issue. does drylock need to be sanded? it seems that after any sanding i do it is nearly impossible to completely remove the dust.Helpful Reply
-
-
KMS Woodworks on Jun 28, 2011It sounds like you may need to spend some good quality time doing some more serious prep work....95% of all paint failures are do to crappy prep. All of the old paint that is loose will need to be scraped off...if it is flaking off when you try to paint it is not "bonded" to the wall. Not matter what you do this will continue to be a problem until that part is resolved. A HD metal putty knife scraper may be your best weapon of choice, you may then need to followup with a scrub brush and some TSP and a bucket of water, This will need to dry thoroughly, if you have big holes and gaps they could be filled with drywall compound and sanded smooth, prime then paint. The drywall compound will work as long as there is no moisture trying to get in and "push" it off the wall. Mineral efflorescence can ruin paint jobs too...so the moisture issue is critical. Concrete as a finished wall covering is pretty rare, you could take it up a notch and tile these wall...again doing some good prep.Helpful Reply
-
-
Liz on Jun 29, 2011More important - what color will you be painting it?Helpful Reply
-
-
Chezwhick on Jun 29, 2011pink? light purple?Helpful Reply
-
-
Liz on Jun 29, 2011http://www.materials-world.com/paint-colors/behr/behr-colorsmart/behr-colorsmart-01.htm - foxy pink!Helpful Reply
-
-
Chezwhick on Jun 29, 2011it looks pretty dark. i was thinking a lighter color. poetic princess looks niceHelpful Reply
-
-
Chezwhick on Jun 29, 2011shes only 9 months. foxy pink might make it kinda dark and dreary. i envision more light and airy. maybe we can do dark on bottom and lighter on top. I will just need some sort of borderHelpful Reply
-
-
Liz on Jun 29, 2011That sounds nice! how about a mid wall molding?. And Danielle R is right, she's 9 months now but when shes 3...Helpful Reply
-
-
KMS Woodworks on Jun 29, 2011How about a little bead board in the darker color below , with the lighter color above. the bead-board would eliminated the need to patch 1/3 of the wall...and could be set to the wall with panel adhesive.Helpful Reply
-
-
Chezwhick on Jun 29, 2011@KMS that sounds interesting and almost easier. any idea on what that would cost? for the painting i have all the supplies and would just need to purchase the paint. I would estimate the rooms about 100 SQFHelpful Reply
-
-
Chezwhick on Jun 29, 2011i mean the cost of the bead boardHelpful Reply
-
-
KMS Woodworks on Jun 29, 2011Chez, you can get a 4 x 8 sheet of "fake" bead board for a bit over 20 bucks http://www.homedepot.com/h_d1/N-5yc1v/R-202090192/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 the real stuff is a bit more but still very reasonable. http://www.homedepot.com/h_d1/N-5yc1v/R-202075050/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 Both of these would be "topped" with a strip of "chair rail" molding.Helpful Reply
-
-
Chezwhick on Jun 29, 2011hmmmm. got me thinking here. i like the fact that it will cut out a lot of the patch work. the bottom half of the wall is typically the most banged up.Helpful Reply
-
-
Chezwhick on Jun 29, 2011while we are on this: whats the best technique to properly paint the edges of the walls and ceiling? I don't like tape as it tends to get messy and difficult to remove.Helpful Reply
-
-
KMS Woodworks on Jun 29, 2011Chez . I "cut in" with a tapered 1 1/2" brush...a nice PURDY one. With some practice you can get a better faster cleaner line than using tape especially on textured wall...this works better for any corner.. If your painting stripes on a flat surface use tape....In corners this can be a wall to wall corner or a ceiling to wall corner. A short step ladder is a must for the taller areas as you need to be close the "see" well and "drive straight". The tapered brush will allow you to get in to the very corner. After loading about 1/3 of the brush I start in the corner with the brushes tip up and handle to the right. The Sweet spot happens when the brush is angled over slightly to "open" the hollow pocket that holds the paint. Smooth steady pull downward for about a foot...then reload repeat. I use the same methods cutting in window and door trim, baseboards and along cabinet edges. If the walls corner is the same color its a lot easier..and you can just blast away, I Cut -In first then roll...I extend my cut out about 2" then roll in to about 3/4" This gives a more consistent "brush mark" free surface. I just finished painting two bedrooms, the living room and kitchen (and the ceiling in both of these rooms) in our rental these last few days. Today I was painting window exteriors and the front door. I'll get some pics up tomorrowHelpful Reply
-
-
Dan's of Central Florida, Inc. on Jun 30, 2011Hi there, If you have textured walls then one of those little mini-rollers (sometimes called "hot dog" or "cigar" rollers) can be of great help. Use the brush to do the actual cut line, but fill out/widen the brush line with the mini-roller. Makes it MUCH easier to fill in all the little divots of the texture. If you get the kind of mini-roller that has a fabric tip (as opposed to those with a plastic cap on the end), you can use it to paint the corners of walls where they meet (providing you intend to paint both those walls). Those little rollers are great and one of my most useful painting tools. They only cost around $3 - $5.Helpful Reply
-
-
Chezwhick on Jul 01, 2011started the spackling and scraping. I decided to take my time and really focus on the prep work as suggested by KMS. to accomplish this I am not even buying the paint until the room is 100% ready. i know that once i have the paint im going to get antsy to just finish it as quick as possible.Helpful Reply
-
-
Dan's of Central Florida, Inc. on Jul 01, 2011Something that may save you a bit of time (and turn out looking crisper) is painting the trim work first, providing you have things like baseboard. trim I find that it is much easier to do it this way: paint the trim first before you paint the rest of the wall. It is easier to make a nice line on the wall than to paint in the little top lip of many trim boards. Once the trim paint is dry, mask it all off with blue painter's tape (1 1/2 or 2 inches wide). Do a very nice, straight job of laying this tape down. This part is sort of critical. Now paint the rest of the wall. The tape should block any roller spray as well as any paint you get on it from the brush. Once the wall has become mostly dry pull up the tape on the baseboards. If you did a good tape job, it will leave behind a nice straight line. You may need to do just a few touch-ups here and there once the wall paint is totally dry.Helpful Reply
-
-
Liz on Aug 15, 2011Just checking up... how's this project coming along??Helpful Reply
-
-
Jane B on Aug 25, 2011A word in favor of beadboard: my late husband was in a wheelchair the last few years of his life, and he kept ramming the wall in his handicapped bathroom as he angled his chair, leaving tire marks all over the light blue walls. I put up beadboard and painted it a much darker shade of blue -- it worked perfectly! And it looks great.Helpful Reply
-
-
KMS Woodworks on Aug 26, 2011Baths are a great place to use a tile "wainscot" too....very durable and simple to clean.Helpful Reply
-
-
Sherrie S on Nov 04, 2011KMS, what is the difference between beadboard and wainscot?Helpful Reply
-
-
KMS Woodworks on Nov 04, 2011Bead board is a type paneling that has a"bead" profile along one edge. A convex half circle type of bump alternating with a flat panel. ...Wainscot in the normal definition is a covering along the lower portion of a wall...it CAN be of Bead board...or tile or a number of other coverings...Frame and panel is another type of "wainscot"Helpful Reply
-
-
Michelle B on Feb 08, 2012We used beadboard for our son's nursery: http://brooksbaby.wordpress.com/category/baby-nursery/Helpful Reply
-
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
What’s your favorite flower?
Let's brighten up our day with some floral beauty! Flowers come in so many shapes, sizes, and colors, and everyone has a favorite. We want to know: What is your favor... See more
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
Any great tips for removing hard water stains from exterior windows?
Hey there fellow forum members!I need some help to make my home's exterior windows shine again! Any tips on tackling those stubborn hard water stains? They're driving... See more
Can I dry pine cones Outside instead of the oven?
they have been soaked in vinegar and water.
Can canvas outside window awnings be painted and how?
I have a dark green canvas awning and would like to change the color to gray. Is this possible and what type of paint do I use.
How can I make a DIY hair dryer diffuser?
Best hairdryer diffuser attachment!Protect your hair from heat and damage with Hairizone diffuser that Amazon reviewers swear by!