SK's Copper Work
by
SK on Elderberry
(IC: professional)
I love copper, in all it's forms. I started working with 16 ml sheet copper for my countertops. It. was an enlightening project.
To say the least, I learned a lot.
This might not be a project most people would attack. But when I want something, I jump in, and as well as getting something cool, I learn a little along the way.
To say the least, I learned a lot.
This might not be a project most people would attack. But when I want something, I jump in, and as well as getting something cool, I learn a little along the way.
My sub-surface of the island was 1" plywood. I sealed the wood with a good water based primer. I let this dry for two days.
I laid heavy weights on this surface for two days. I made sure I didn't have any air pockets. I actually rolled it with a large heavy rolling pin from the center out. This helps eliminate bubbles.
After the drying time, I started to pound my edges with a rubber mallet. If you have made a quilt the edges I did here are somewhat like a quilts folded edges.
I tried to make sure I was holding down the surface so I didn't jar and lift the top.
These cool corners are actually made for old steamer trunks. I bought every one I could find.
Copper is a natural antibacterial surface. It works great on cooking surrounds. It patina's as it oxidizes. The color is wonderful, but you can keep it shiny as a new penny with a sealer.
I like my copper naturally oxidized. It's fun to clean. Salt and lemon juice.
Just a few of my copper projects.
Don't be put off with metal surfaces. They are some work, but the look is amazing.
Enjoyed the project?
Published May 6th, 2014 7:25 PM
Comments
Join the conversation
4 of 16 comments
-
Chris aka monkey on Dec 01, 2015@SK on Elderberry copper is so gorgeous and you made all of these counters gorgeous, hope you are getting settled into your new home miss you xx
-
-
Janice Sapp on Dec 17, 2016I have reclaimed a small cabinet/chest that I painted white; this small cabinet will be used in my bathroom and will hold clutter items that are needed at least once if not twice a day. I've already been playing around with craft copper metal sheets which do cover and doesn't wrap around the lip of the top. I was thinking that there must be some kind of copper edging so that I could seal the edges.. If you, dear Reader, understand what the dickens I'm talking about and have a suggestion, please let me know.
-
SK on Elderberry on Dec 18, 2016I have seen copper "lace" not sure where to purchase it. I would use a beautiful 3D it with copper paint. I use Modern Masters Metal effects paint. Fun stuff. Good luck SK SK on Elderberry sksartell.blogspot.com
-
-
Frequently asked questions
Have a question about this project?