Unique Kitchen Backsplash and Uneven Kitchen Floor
I would love your ideas on two things: 1) what to do with a floor that is half hardwood (prior bedroom) and half fiberboard covered with linoleum and uneven because of the original way the floors were built. I was going to use pebble tiles but in my laundryroom where I experimented, the roughness of the grout and unevenness between pebble stones are a pain to clean.
2) I'd like a backsplash that can go behind the stove n cabinets (and all the way to the floor behind stove) on one side and cabinets on the other. I'd like it to be easy to clean, from bottom of cabinets to floor or counter-top - maybe even something I can do all walls in. Someone at a large hardware store suggested flashing but it's just so smooth and bland and I don't know how covering seams will look. Suggestions or pics would be greatly appreciated.
-
Woodbridge Environmental Tiptophouse.com on Oct 03, 2014@Roxanne for your answer on #1 is to remove the wood floor and the existing fiberboard so your down to the same level sub floor and start new. Or remove the hardboard and what ever is below it down to the sub floor and install new hardwood off of the other existing floor. Sand both even, stain and seal using a high quality poly sealer that will resist moisture issues often found in a kitchen. For #2 I would suggest that you use subway tile. These 2 x 4 or 6 inch tiles are easy to install in a brick pattern as even if your off just a bit you will never see it. You can also use peel and stick tile on the wall behind the stove. I assume you want this to make It easy to clean. There is really no reason to tile much more then one row below the counter height as no one will ever see it. Waste of money and time. But if you are interested in easy cleaning simply use the peel and stick stuff below the counter height. You can use larger tiles, but unless you have worked with tile in the past, its not a easy DIY project at all. There is tin panels you can purchase that normally would be used on ceilings, There has been some success using these on the back splash areas. There are different patterns that can be used and some come pre finished or plane so you can paint. The last thing is to use paint. A good quality oil based paint and primer, lot of work, will withstand repeated cleanings and look good for long time. Or the old stand by, a good quality vinyl wall paper with a nice pattern.Helpful Reply
- See 1 previous
-
-
Starr on Oct 05, 2014For you kitchen back splash they have a lot of glass tiles now that are beautiful, other wise I have seen the tin tiles used also.http://www.menards.com/main/search.html?search=tin+tiles&sf_categoryHierarchy=Kitchen_7200Helpful Reply
-
-
Marie Cole on Feb 01, 2015I agree completely with Woodbridge Environmental as I had a flood a few years back and during the clean up it was discovered my floors were uneven due to something like what you are talking about. Having them evened up is wonderful! Have you thought of Subway tiles for the backsplash/wall combo? I found tiling to be much easier/friendlier than I thought it was going to be, so if you are thinking of doing it yourself, not to worry! Have fun!Helpful Reply
-
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Tile backsplash when there is existing countertop backsplash
We are thinking about how to add a backsplash to our kitchen. Unfortunately when we had our countertops installed we ordered a small backsplash that comes part way up... See more