Concrete Resurfacing Removal
-
KMS Woodworks on Aug 16, 2012The leading cause of resurfacing problems is poor prep...where it is coming off are the trouble areas...you may have some luck re-working these and resurfacing the entire area. In the worst case you may need to have the whole area ground down.Helpful Reply
-
-
Mary P on Aug 16, 2012Thanks for the answers, but I'm still hoping for more ideas.Helpful Reply
-
-
Burco Surface & Decor LLC. on Aug 16, 2012is it just me or is there no picture to look at?Helpful Reply
-
-
Mary P on Aug 16, 2012It is not just you, I will try to do that tomorrow.Helpful Reply
-
-
Burco Surface & Decor LLC. on Aug 17, 2012ok, if you post a picture i may be able to help. I have played around with concrete once or twice. lolHelpful Reply
-
-
Mary P on Aug 21, 2012Thank you for the suggestions but this doesn't answer my question because I am hoping I don't have to resurface the area.Helpful Reply
-
-
KMS Woodworks on Aug 21, 2012If the material has lifted from the substrate it is only a matter of time before it cracks and brakes away. Any luck with the picHelpful Reply
-
-
Mary P on Aug 21, 2012This is the picture for the resurfacing mess with the concrete. How to get rid of it. Some of it was stuck right to the porch.Helpful Reply
-
-
KMS Woodworks on Aug 22, 2012ugh...that is a mess. One question you need to ask your self is how much time money and effort you want to put into this? Because of the color, your cheapest routed would be to paint the whole she bang...the texture would still be off but at least is would look better. In that case using a right angle grinder to ease the "edges" of where the surfacing broke away would reduce the chance of it getting worse and tripping etc. Your could resurface again which would be a lot of work. What might be the best option is installing some tile over the whole thing. A nice textured porcelain tile would be slip resistant and give a nice uniform look. That tile should be set with a polymer modified thin set...after the lose bits are grinder touched up.Helpful Reply
-
-
Mary P on Aug 22, 2012At this point, I have taken up all that has buckled underneath. We have tried sanding and scraping. I have to depend on others t do it for me. Maybe, I could just put a light layer of concrete over it and paint it.Helpful Reply
-
-
KMS Woodworks on Aug 23, 2012that may work but there seems to be a texture pattern there in the areas that have not failed. Matching that would be key to making it look uniform.Helpful Reply
-
Related Discussions
How can I refresh an old ugly lampshade?
How can I refresh an old cloth lamp shade that has just gotten stained & ugly over the years. The shade is a strange shape so I need an easy solution. Any ideas? Than... See more
What are your most dreaded household chores?
Let's face it, household tasks are a part of life, but that doesn't mean we have to love them, right?We all have those duties that we'd rather avoid at all costs. So,... See more
How can I make affordable arm covers for new chairs?
I’m redoing my living room and giving it a completely new, slightly glam/modern farmhouse look. Neutral Color scheme will be white, grays, a little black, touches o... See more
If I put bleach in my fountain to kill mosquitos will it harm the bird
Rocking chair
I bought this rocking chair 31 years ago when my son was born. It's time to do something with it. Looking for ideas.
How to remove burnt pasta stuck at the bottom of a pot?
Burnt pasta stuck at bottom of pot - how to clean a burnt pot to remove the food?