Has anyone used Thomas Stainless Steel Paint on appliances?
-
Neelloc Mclean on Jan 13, 2015works good but strictly follow instructions...and do a sample testingHelpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Jan 14, 2015There are a lot of special finishes for appliances available to most homeowners. This is a bit of a task but can be accomplished pretty easy if you take the time and use the proper equipment suggested by the manufacture of the paint you decide to use. The trick is proper prep. As with any painting project you need to carefully clean the surfaces being painted. And do not handle the sanded areas with your bare hands once its clean. The oils alone in your hands can cause an early failure of the finish. Ideally a air compressor with spray gun or an HVLP spray system should be used to apply the finish. This takes some practice to do without it running. If you have a friend that paints autos or has done so in the past, bake them a cake and get them to help you. If not I suggest that you practice paining using a spray gun on some wood or cardboard to assure your not applying it to heavy or to light. To heavy it will run, to light it will be rough to the touch. Allow the finish to properly dry. Do not rush handling it.Helpful Reply
-
-
Stacey Dunn on Jan 14, 2015I used rustoleum black appliance paint on my refrigerator 7 years ago and still looks great. Not sure about the stainlessHelpful Reply
-
-
Jane on Jan 14, 2015We changed a gold refrigerator to an almond one years ago with Rustoleum paint. The finish outlasted the refrigerator. I also used the white appliance paint on my dad's rusty refrigerator and it looked like new.Helpful Reply
-
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Has anyone used Gardner-Gibson Asphalt Fence Post Paint?
We have a farm and I'm looking for anyone who can provide experience information on this product. Also, if anyone has a good recommendation for fencing paint that is... See more
Has anyone used Krylon "Make it Stone" paint yet??
II am planning on doing countertops in a beach house and have tried a few samples on a piece of laminate I had. I need help with how much I should sand to make it smo... See more