I have Post Hurricane Sandy Flood floor removal questions. Having difficulty removing old lino in one room...
-
KMS Woodworks on Nov 11, 2012You might test it with a bit of "solvent" I have used a "goo gone" type product on a concrete floor project to remove some stubborn residue from a cork tile installation. The risk with this though is then you are left with a solvent infested wood subfloor which may pose more trouble for future work. good ol elbow grease works, I have also used my belt sander to get the final bit of adhesive residue up from wood flooring. This glue will clog the sanding sheet ( more so with finer grit) I use a 40 grit for this rough work.Helpful Reply
-
-
Kathleen M on Nov 11, 2012This is the base floor-the layer between the living space and the outside world, and I am sure that a new sub-floor will be needed throughout to level everything. There isn't much glue residue after the tiles are removed. I just need a more efficient method to remove the tiles. It's s time consuming, and there is so much to be done! to Add to this post...Helpful Reply
-
-
Brian Campbell, Basswood Artisan Carpentry on Nov 11, 2012You might try applying Dry Ice to the tiles. This sometimes works to loosen the adhesive and they may just pop loose. You can usually purchase dry ice from an ice cream shop. Bring your own cooler along. Be careful not to get frost bite with it though. No mess and no residue with it though. I just turns back into CO2 gas and vanishes into the air.Helpful Reply
-
-
Building Moxie on Nov 11, 2012how about an iron? a heat gun or a propane torch to soften glue, then return to scraping. with the later two I would recommend using an appropriate respirator ... especially considering it is possibly that the tiles contain asbestos (only if they are dated). If you try the dry ice suggested by @Brian Campbell, Basswood Artisan Carpentry I love to hear ... I have never heard that before, but Brian is usually dead on. all the best.Helpful Reply
-
-
Kathleen M on Nov 11, 2012Thank you. I'm going to try the iron tomorrow, just because it's handy. I don't think there are any ice cream shops open in the area to get dry ice from. I'll let you know how I do. Thank You!Helpful Reply
-
-
Brian Campbell, Basswood Artisan Carpentry on Nov 12, 2012If the iron doesn't work, you can have dry ice shipped to your door from NYC: http://www.continentalcarbonic.com/buy-dry-ice-consumers.htmlHelpful Reply
-
Related Discussions
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
How do I remove super glue from a rubber floor mat?
I spilled glue on my rubber floor mat and have tried alcohol, soap, goop and some other things, but nothing took it all away.
How to remove cigarette smoke smell from my sewing machine?
I just bought a used sewing machine. Brought it home and wiped it down with Clorox wipes and they were dirty. Now the machine reaks of cigarette smoke. I tried vinega... See more