I have Post Hurricane Sandy Flood floor removal questions. Having difficulty removing old lino in one room...
-
KMS Woodworks on Nov 11, 2012You might test it with a bit of "solvent" I have used a "goo gone" type product on a concrete floor project to remove some stubborn residue from a cork tile installation. The risk with this though is then you are left with a solvent infested wood subfloor which may pose more trouble for future work. good ol elbow grease works, I have also used my belt sander to get the final bit of adhesive residue up from wood flooring. This glue will clog the sanding sheet ( more so with finer grit) I use a 40 grit for this rough work.Helpful Reply
-
-
Kathleen M on Nov 11, 2012This is the base floor-the layer between the living space and the outside world, and I am sure that a new sub-floor will be needed throughout to level everything. There isn't much glue residue after the tiles are removed. I just need a more efficient method to remove the tiles. It's s time consuming, and there is so much to be done! to Add to this post...Helpful Reply
-
-
Brian Campbell, Basswood Artisan Carpentry on Nov 11, 2012You might try applying Dry Ice to the tiles. This sometimes works to loosen the adhesive and they may just pop loose. You can usually purchase dry ice from an ice cream shop. Bring your own cooler along. Be careful not to get frost bite with it though. No mess and no residue with it though. I just turns back into CO2 gas and vanishes into the air.Helpful Reply
-
-
Building Moxie on Nov 11, 2012how about an iron? a heat gun or a propane torch to soften glue, then return to scraping. with the later two I would recommend using an appropriate respirator ... especially considering it is possibly that the tiles contain asbestos (only if they are dated). If you try the dry ice suggested by @Brian Campbell, Basswood Artisan Carpentry I love to hear ... I have never heard that before, but Brian is usually dead on. all the best.Helpful Reply
-
-
Kathleen M on Nov 11, 2012Thank you. I'm going to try the iron tomorrow, just because it's handy. I don't think there are any ice cream shops open in the area to get dry ice from. I'll let you know how I do. Thank You!Helpful Reply
-
-
Brian Campbell, Basswood Artisan Carpentry on Nov 12, 2012If the iron doesn't work, you can have dry ice shipped to your door from NYC: http://www.continentalcarbonic.com/buy-dry-ice-consumers.htmlHelpful Reply
-
Related Discussions
I want to get rid of a trumpet vine that is growing on my home.
How do you get rid of Trumpet Vine. It is growing into the foundation of my house. I have tried pulling it out, round up, vinegar and salt. Please share your knowled... See more
How can you make a regular sized door fit into a mobile home frame?
The back door to my mobile home is a an odd size - specific to mobile homes. They are extraordinarily expensive. Is there some way to cut down a regular sized door to... See more
What can I do with this DVD stand?
I have a DVD stand that I am trying to repurpose instead of trash. Any ideas?
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
What’s your favorite flower?
Let's brighten up our day with some floral beauty! Flowers come in so many shapes, sizes, and colors, and everyone has a favorite. We want to know: What is your favor... See more
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
Any great tips for removing hard water stains from exterior windows?
Hey there fellow forum members!I need some help to make my home's exterior windows shine again! Any tips on tackling those stubborn hard water stains? They're driving... See more