MirrorMate frames makes custom, retro-fit kits that attach directly to the mirror so you can use the mirror you have - and the transformation takes just minutes. To see all the styles available, check them out at www.mirrormate.com.

cover the pump as you see it in the picture, then stack other pots as you like. Then you just run clear hose (Lowes) from the pump (also Lowes) up to the top saucer. You have to do a little cutting and drilling on the first pot that the pump is under. Cut out a little space on the edge of that pot so the electrical cord can run through and so that the pot can sit flat and also drill a few holes in the upper rim of that pot so water can flow inside to the pump. Since the pots already have holes in the bottom, you will only have to drill through the center of the saucers to run the hose up.

You have to use a masonry bit. They are a little expensive, but well worth it. You should get a bit large enough to drill a hole the same size as the holes in the pots. Then get a hose wide enough, but one that will easily slide through to the top. I got everything I needed at Lowes.

Put colored stones or rounded river stones (Lowes again) in the top and middle saucers for decoration. The stones will control how your water comes out of the top. Good luck. Have fun.

- Drill 2 holes in each crate (I drilled mine in the center back plank of the crate on either side)

- Attach crate to the wall with screws and anchors (if needed) using the holes you drilled in the crate.

- Repeat the process and hang more crates side by side or on top of each other either horizontally or vertically.

- Combine the crates with some vintage wire baskets, by drilling two holes and anchors/screws in the wall, hang basket on screws.

- Decorate to your heart's content!

More projects like this can be seen at:

http://asortoffairytalegirl.blogspot.com