15K Views
Crosses Made From Cowboy Boots
![Kackie3](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-K-605BE8.png?size=91x91)
by
Kackie3
(IC: homeowner)
I made these crosses for Christmas presents.
My husband cut a cross out of 1/2 inch plywood and we cut the tops off of old boots with a razor blade. I washed the tops and set them out to dry. Then I used a towel over them and ironed each one to flatten it. I affixed fur in the center where the cross arms intersect with spray adhesive and then layered the boot tops down the edges, affixing them with furniture tacks. Then we cut strips of old fencing to finish the edges all the way around. I found decorative crosses at Hobby Lobby that I fastened on top of the fur.
Enjoyed the project?
Published June 1st, 2015 9:54 AM
Comments
Join the conversation
5 of 15 comments
-
Kackie3 on Nov 15, 2015
- See 1 previous
-
Bfb5160000 on Jan 10, 2017
-
-
-
Frequently asked questions
Have a question about this project?
what is the dimension of the wooden cross?
i have a pair of old boots that belonged to a very good friend of mine that is now I’ll. I love this idea to preserve the memory of him. I would like to find some one to make smaller crosses. One out of each boot if possible. So I could have one and then his son could have one. Do u know of anyone that could do that? Thanks is advance .
Is there anyone that you knpw of that could make a cross for meand not cost to mucg? My h8sband died last February and I have three paor of his boots thatvI want done and I can't find anyome to do than. Yours are beautiful