How can I paint over the woodwork in an old house?
-
Susanne on Jul 05, 2015I suggest wear a mask, sand as much as possible, then prime with a good primer and then paint. I had to do the same thing in my 1950s house. (We are talking about inside, right?) If outside, power washing might help get some of the loose paint off and then prime and paint. Primer is the key. Tinted primer is available too. Hope this helps.Helpful Reply
-
-
Darla on Jul 05, 2015Any loose paint you will have to sand or scrape off. If the old paint is oil paint, you might have to paint oil paint over it. It would probably be a good idea to prime the old paint especially if the bare wood is showing through.Helpful Reply
-
-
Nancy Clement on Jul 05, 2015You may want to check for lead in the paint before you start sandingHelpful Reply
-
-
Tracy C on Jul 05, 2015Have you tried chalk paint? I would buy a small jar/can in the same color you planned on and see if that works. I did it to my 50's kitchen cabinets (yes.....kitchen cabinets) about 3 months ago and it is holding up better than I had hoped for. I can't afford a new kitchen right now, just too much $$, but I wanted to do something so I painted and replaced the knobs.....way better! good luckHelpful Reply
-
-
Debi53 on Jul 05, 2015Everyone is giving you good advice. Before sanding, do have your paint checked for lead. You do NOT want to be inhaling that or asbestos, both which were common in pre-1978 houses. Where you have already painted, you have no choice but to sand off the new paint. In areas where you have not painted, I suggest using liquid sandpaper/deglosser. This is so much easier than sanding. I am assuming that you don't have flaking paint. After the liquid sandpaper sets up and becomes tacky, use a primer that will adhere to oil based paint and/or shellac. After this, you can use any kind of paint: chalk paint, latex, or oil & it will stick. The prep & primer are the key to a good long lasting paint job.Helpful Reply
-
-
Country Design Home on Jul 06, 2015Probably oil paint or some kind of oil-based sealer. The other alternative to sanding is using "liquid sander". You paint it on and it bonds with the stuff already on the wood and provides a tacky surface for your paint to stick. Less messy than sanding, especially if you have a lot of wood work to cover.Helpful Reply
-
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?