702 Views
Chilliwack Street Home by Randy Bens Architect
by
Ricky
(IC: blogger)
The project brief was to add a new floor to an existing 1950's split level home, which was originally designed by an architect. However, due to some unforeseen conditions, the existing house had to be removed. So the construction is all new, and the design retains hints of the old.
The existing house was too small for the family, so a new floor was added containing a master bedroom, ensuite, office and deck. The new upper floor cantilevers in two directions, and compliments the lower (original) cantilevered portion of the house.
To soften the strong geometry of the house, clear stained cedar siding was used on all surfaces to give the composition scale and warmth. The inner face of each cube is lined with bluestone to provide contrast.
The house feels very spacious in relation to its actual size. There are three ceiling heights used throughout the house which create volume and a sense of openness. Careful window placement allows walls to be washed with light and views to be controlled.
The existing house was too small for the family, so a new floor was added containing a master bedroom, ensuite, office and deck. The new upper floor cantilevers in two directions, and compliments the lower (original) cantilevered portion of the house.
To soften the strong geometry of the house, clear stained cedar siding was used on all surfaces to give the composition scale and warmth. The inner face of each cube is lined with bluestone to provide contrast.
The house feels very spacious in relation to its actual size. There are three ceiling heights used throughout the house which create volume and a sense of openness. Careful window placement allows walls to be washed with light and views to be controlled.
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published January 31st, 2013 11:48 PM
Frequently asked questions
Have a question about this project?