Glass Electrical Insulator Vase Stand Tutorial
by
The Painted Hinge
(IC: blogger)
If you're like me, you like to collect shiny things.
If you're really like me, you don't know what to do with the shiny things once you've collected them.
So my collections end up in one of my cupboards collecting dust.
Antique glass electrical insulators are one of those shiny things I like to collect. I've seen them used as a part of a wall mounted vase, which looked really cool. But I wanted something freestanding I could put on my table.
If you're really like me, you don't know what to do with the shiny things once you've collected them.
So my collections end up in one of my cupboards collecting dust.
Antique glass electrical insulators are one of those shiny things I like to collect. I've seen them used as a part of a wall mounted vase, which looked really cool. But I wanted something freestanding I could put on my table.
Now, if you're really really like me, you also have a bunch of stuff you don't use anymore.
You will need:
With the wire hanger flat and the hook facing away from you, bend both sides of the wire hanger down in the mid spot between the hook and the ends.
Okay, this is going to be hard to explain, so bear with me. With the wire hanger in the same position as when you bent both sides down, take the hook and pull it towards you; then up, over, then under the straight wire on the bottom of the hanger. You will have twisted the top part of the hanger 360 degrees around the bottom part of the hanger and the hook will be back at the same point it started at, just now it's been twisted completely around the bottom flat wire of the hanger. This makes a place that will securely hold the electric insulator in the middle of the hanger.
Straighten the hanger hook and re-bend it at the very bottom so all three legs are the same length.
This is what the finished product looks like. You may have to finagle with a bit to get all the legs even.
Insert the insulator in the middle of the stand to where it will sit snugly. It is surprisingly sturdy, and as long as all the legs are the same length, it will not tip!
Add water and flowers, and you've got yourself one sharp looking centerpiece! :)
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published July 31st, 2015 12:13 PM
Comments
Join the conversation
2 of 99 comments
-
Alyce Brim on Mar 30, 2017
We have two five gallon pails of insulators-green & clear. Some people make hanging lights out of them-drill hole in middle-attach electrical wire with bulb outlet(small bulbs & attach several to have bar lights above their counters. Alyce-IA.
-
-
Faith Stevens on Nov 28, 2022
Since I have lots and lots of insulators I decided to try this but with a white one. I'm not sure I would dare put water in it and trust its stability so I put in a dried item.
-
Frequently asked questions
Have a question about this project?
where do you find the insulators?