I have a built-in microwave over w/trim kit which is already installed in the wall.
-
Imagery on Nov 05, 2011That's a tough one...Is there any way to slip a shim into the grill of the ventilation openings to allow for adjustment, instead of removing the screw? Some trim kits have slots that will allow minor adjustments to the microwave feet. If not, firm steady pressure directly to the screw head with the correct size screwdriver may work. Be sure to keep the screwdriver at the exact same angle as the screw, lots of pressure too, this should allow you to free it. Is the adjustment needed small enough that you may be able to lightly finesse the trim kit with a rubber mallet? May work if it only need a slight bump in the right direction. If not, drilling, or ez-out may be your only option. If you are still unsure, you may want to call a handyman to take a look for you....Good luck!Helpful Reply
-
-
KMS Woodworks on Nov 08, 2011How long has it been this way?...Is the microwave out of level or just the trim kit?...if it is the microwave and this was a recent install have the installer come back and fix it. A lot of the over head microwave I have installed "hang" from a cabinet of framing above...it may need shimming there. The the opening is out of square then the unit may be "racked" which means is a bit twisting in the vertical plane and the corners are no longer 90 degrees. this might be part of the problem with the door...if the door cap along the side opposite of the hinges is wedge shaped than this could be the problem.Helpful Reply
-
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
What’s your favorite flower?
Let's brighten up our day with some floral beauty! Flowers come in so many shapes, sizes, and colors, and everyone has a favorite. We want to know: What is your favor... See more
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
Any great tips for removing hard water stains from exterior windows?
Hey there fellow forum members!I need some help to make my home's exterior windows shine again! Any tips on tackling those stubborn hard water stains? They're driving... See more
Can I dry pine cones Outside instead of the oven?
they have been soaked in vinegar and water.
Can canvas outside window awnings be painted and how?
I have a dark green canvas awning and would like to change the color to gray. Is this possible and what type of paint do I use.
How can I make a DIY hair dryer diffuser?
Best hairdryer diffuser attachment!Protect your hair from heat and damage with Hairizone diffuser that Amazon reviewers swear by!