I have a built-in microwave over w/trim kit which is already installed in the wall.
-
Imagery on Nov 05, 2011That's a tough one...Is there any way to slip a shim into the grill of the ventilation openings to allow for adjustment, instead of removing the screw? Some trim kits have slots that will allow minor adjustments to the microwave feet. If not, firm steady pressure directly to the screw head with the correct size screwdriver may work. Be sure to keep the screwdriver at the exact same angle as the screw, lots of pressure too, this should allow you to free it. Is the adjustment needed small enough that you may be able to lightly finesse the trim kit with a rubber mallet? May work if it only need a slight bump in the right direction. If not, drilling, or ez-out may be your only option. If you are still unsure, you may want to call a handyman to take a look for you....Good luck!Helpful Reply
-
-
KMS Woodworks on Nov 08, 2011How long has it been this way?...Is the microwave out of level or just the trim kit?...if it is the microwave and this was a recent install have the installer come back and fix it. A lot of the over head microwave I have installed "hang" from a cabinet of framing above...it may need shimming there. The the opening is out of square then the unit may be "racked" which means is a bit twisting in the vertical plane and the corners are no longer 90 degrees. this might be part of the problem with the door...if the door cap along the side opposite of the hinges is wedge shaped than this could be the problem.Helpful Reply
-
Related Discussions
Electric stove burners not working? Need help!
I've run into a frustrating problem with my electric stove, as none of the burners seem to be heating up anymore. It's been quite a setback for my culinary adventures... See more
What’s your favorite flower?
Let's brighten up our day with some floral beauty! Flowers come in so many shapes, sizes, and colors, and everyone has a favorite. We want to know: What is your favor... See more
How do I get rid of mole/voles and chipmunks from my garden and yard
I want to get rid of a trumpet vine that is growing on my home.
How do you get rid of Trumpet Vine. It is growing into the foundation of my house. I have tried pulling it out, round up, vinegar and salt. Please share your knowled... See more
What can I do with this DVD stand?
I have a DVD stand that I am trying to repurpose instead of trash. Any ideas?
Huge tomato plants and no flowers!
Does anyone know the cause of my healthy looking tomato plants not producing flowers? I see no insects..water as needed (they're in huge containers) and plenty of af... See more
How can you make a regular sized door fit into a mobile home frame?
The back door to my mobile home is a an odd size - specific to mobile homes. They are extraordinarily expensive. Is there some way to cut down a regular sized door to... See more