I have a built-in microwave over w/trim kit which is already installed in the wall.
-
Imagery on Nov 05, 2011That's a tough one...Is there any way to slip a shim into the grill of the ventilation openings to allow for adjustment, instead of removing the screw? Some trim kits have slots that will allow minor adjustments to the microwave feet. If not, firm steady pressure directly to the screw head with the correct size screwdriver may work. Be sure to keep the screwdriver at the exact same angle as the screw, lots of pressure too, this should allow you to free it. Is the adjustment needed small enough that you may be able to lightly finesse the trim kit with a rubber mallet? May work if it only need a slight bump in the right direction. If not, drilling, or ez-out may be your only option. If you are still unsure, you may want to call a handyman to take a look for you....Good luck!Helpful Reply
-
-
KMS Woodworks on Nov 08, 2011How long has it been this way?...Is the microwave out of level or just the trim kit?...if it is the microwave and this was a recent install have the installer come back and fix it. A lot of the over head microwave I have installed "hang" from a cabinet of framing above...it may need shimming there. The the opening is out of square then the unit may be "racked" which means is a bit twisting in the vertical plane and the corners are no longer 90 degrees. this might be part of the problem with the door...if the door cap along the side opposite of the hinges is wedge shaped than this could be the problem.Helpful Reply
-
Related Discussions
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
How do I remove super glue from a rubber floor mat?
I spilled glue on my rubber floor mat and have tried alcohol, soap, goop and some other things, but nothing took it all away.
How to remove cigarette smoke smell from my sewing machine?
I just bought a used sewing machine. Brought it home and wiped it down with Clorox wipes and they were dirty. Now the machine reaks of cigarette smoke. I tried vinega... See more
What front door paint color would you avoid?
Let's have a little fun with front door colors! We all have our preferences when it comes to home decor, and that includes the color of our front door.But today, I wa... See more
How can I remove green mold or mildew from my old wood fence boards?
I have a lot of old thin wood fencing boards that I want to use as reclaimed wood for indoor walls and such. A lot of them are very green on the side that faced north... See more
How to change a Zipper colour?
I have a lovely pair of black boots with silver zippers. I would like to change the colour of the zippers, 2 on each boot, to black without screwing up the zippers...... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more