Hey. Any advice on the best way to reattach the metal piece that fell off the rim of my antique wooden table?
-
Hudson Designs on Nov 06, 2011I would use a little Loctite PL PREM. adhesive caulk. You can find it at Lowes.Helpful Reply
-
-
KMS Woodworks on Nov 06, 2011I would use a 2 part epoxy...before mixing it up though be sure that the metal piece is the right shape...and has not gotten bent or kinked. You want the pieces to match each other perfectly. The glue I use the most is the 5 min epoxy from Devcon. mix up a small batch on a scrap of cardboard and apply a thin layer to the metal. Position the piece exactly where it need to be and secure with a few strips of painters tape pulled tight over the metal. clean up any glue squeeze out before it hardens... use just enough glue to minimize this. After a few hours you can remove the tape.Helpful Reply
-
-
Lulu Dubin on Nov 07, 2011Thanks guys I will definitely look into both of your suggestions and let you know how it goes.Helpful Reply
-
Related Discussions
How do I update those old brown slidings doors to the closets?
Update these old shabby ugly sliding closet doors?
How do I remove hard water deposits from stainless washing machine tub
My new home's washing machine appears to have a rough buildup near the top of the stainless tub. I have run Affresh through the unit but this remains. I don't want to... See more
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?
How to makeover an ugly metal entrance door?
My entrance door is metal with a small openable window, how to update or make it look nice?
How do I update my ugly mobile home closet doors?
They are completely function
Would you rather wash and fold laundry or clean the dishes?
Given the choice, would you prefer washing the dishes or doing laundry? Share your preferences and insights!
How can I remove a magnetic door knocker from a metal door?
The magnet in the knocker has "welded" to the door and seems impossible to remove. I have to paint the door so if the paint is damaged its not a problem.