My Vinyl floors had gotten so grimy over the years, that I thought I was going to have to replace them. Then I found out about a neat tip, that got them sparkling clean and it was so
easy! I used a cleaning product that most people probably already have, but not one made for floors! Want to know what it is? It's Scrubbing Bubbles! I have the full details on my blog. http://www.graphicsfairy-diy.com/2013/01/my-...
I collected plastic pots of different shapes and sizes, cut the bottoms off, slit them up one side and taped the slit back together. filled them with concrete and then removed the pot by
removing the tape after they dried 24 hours. They are still a bit damp so you can do "wet carving" on them to make your forms more rounded or smoothe. I used rebar again as I had with the Polatems in my earlier post, or you could use conduit, and make them into lanterns. Be sure to put a hole in the middle of each piece so you can fit them over the rebar/conduit. The circular pieces I made by just rolling in my hands...other pieces can also be made such as a finial for the top, which I have yet to make and put on the top.