store finds never looked this good! Also WIN this Fabulous set of vases! Why work when you can win!

INSTRUCTIONS FOR PLANT STANDRemove lamp assembly and wiring from lamp stand, leaving the threaded nipple that connected it to the stand.Paint the stand & basket if desired. We used rust preventive outdoor paint. Cut a block from a piece of pressure treated wood. We used an old piece that we had on hand and cut our block approx. 1"x 5 ½ " x 5 ½".Then drill a hole in the block that will allow it to slip down over the nipple and fit snuggly onto the stand. You will now need to countersink a nut onto the nipple. The block should now be firmly seated.Next, center the basket onto the block and attach as shown in photo.If using the plant stand outdoors you will need to anchor it to the ground. We used two 1/2" pieces of rebar that were about 2 feet long. This will depend on the soil type. If using rebar, you will need a torch to bend a 90 degree angle that will fit over the top of the base as shown in photo. You can be creative with any of these steps, but be sure that it is weather proof and sturdy.

made a bottle tree, a fish pond, grew and dried birdhouse gourds, made raised gardens, painted an old bench, painted rug onto my deck, harvested 40' bamboo, cured them and made a trellis, made a peaceful walking/sitting area in the woods out back. I'm a DYI'er that began as a financial necessity and grew into a passion.......By the way, if you haven't talked to the great people at Four Season Nursery yet, or shopped for mulch, gravel and plants, you're missing an opportunity. They are knowledgeable and dependable. My husband just smiles at me and hates to leave me the truck...he knows I'm going there for a load of something.

#Bestof2012 #greenhouse #garden #DIY #proudestdiy #Love2Repurpose #SpringFever #Recycle