does anyone have any ideas on removing 16x16 tiles off denshield without breaking them?we are tryiong to reuse some of
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011Not going to be very successful if they were properly fastened down. Once the thin set hardens your going to be pretty much out of luck.Helpful Reply
-
-
Terry S on Dec 07, 2011they have been down about 10 yrs , redoing kitchen etc. and dont want to replace 550 sq.ft. of tile. we were hoping to patch?Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011If your doing the kitchen over and the cabinets are going in new places that uncover areas that do not have tiles. You can create a border with a complementary tile and then simply go all the way around the kitchen so it looks as though it was that way from the beginning. Many times when tile cracks in kitchens and its no longer around. People simply place another new tile that complements the older then they remove more to create a pattern look. Just how many are you thinking about removing and moving?Helpful Reply
-
-
Terry S on Dec 07, 2011thank you . we will have most of the cabinets in the same areas,but we are downsizing our island and making a walkway about a 9 sq ft area around it instead of it being attached to the wall. i think i may have enough for that but may need to fill other areas and was hoping there was a solution to pulling up some of the existing tiles in a seperate entry and also using those. they are the same as the kitchen is now.Helpful Reply
-
-
Hewitt Remodeling Services LLC on Dec 07, 2011Terry, As Bob said, if they were installed correctly, it is almost impossible without microsurgery" and a month of Mondays...especially with the larger 16" tiles. Consider going with a complementary tile. TimHelpful Reply
-
-
Harold M on Dec 07, 2011I tried this once and found out it was easier and more cost effective to tear them up and install new. Unless your talking about alot of sq. footageHelpful Reply
-
-
Terry S on Dec 08, 2011the problem is the open floor plan.and 550 sq ft of the same flooring. i think im going to try a dremel tool and a putty knife and hope for the best.i appreciate everyones input.Helpful Reply
-
Related Discussions
How can I turn this old doll house into a book shelf?
What can I use to stop flies from collecting on my new deck?
My deck is new , I was told flies are attracted to the sap of the wood,.
How do I remove paint from painted tile and tub?
How should I remove paint from a tile floor and a bathtub?
How do I take off hard water from my tub?
Here’s my issue I have been living in the same apartment building for 18 years and I have a tub that deals with hard water on a daily basis. What is the best way fo... See more
How do I keep my shower curtain from getting red water stains?
What front door paint color would you avoid?
Let's have a little fun with front door colors! We all have our preferences when it comes to home decor, and that includes the color of our front door.But today, I wa... See more
How do I stop cars from making u-turns in my driveway?
When traffic backs up on our street,people use our driveway to make u-turns. It makes me crazy, especially when the kids are out there.