Hello all!
However, one guy recommends doing it now (December) and another recommends waiting until Spring. Looking for recommendations on the best time to do this, given the fact that we do have water leakage and Chicago winters are rough. Thanks!
-
Woodbridge Environmental Tiptophouse.com on Dec 08, 2011Do not seal the brick. You will destroy the surface of it by trapping any moisture that will still get in and cause it to decay even faster. There are NO sealants that work with brick. Those clear coats they sell telling you that they seal brick simply are snake oil and once the brick moves and cracks develop between them, water will get in and cause more damage. check out www.bia.org for information about your brick and sealing. The next thing to understand is that brick in homes as old as yours has different mortar used to hold them into place. This mortar is much softer then the stuff they sell today. If they tuck pointed the outside surface of the brick with the off the shelf products what happens is the brick can begin to deteriorate and spall on the surface along the edges of where the new mortar was placed. This is caused by the brick rolling when the mortar and brick gets wet. The softer mortar that is on the back side of the brick will move much more then the new mortar used on the front. The result is this rolling action that will cause the damage. Water always goes through brick. It is naturally porous and will leak. If you are experiencing moisture issues as a result then the flashing and weep hole details that are placed both between the brick at the floor, door and window areas have either plugged or have been painted over not allowing the moisture to escape from behind the brick. The people you got in have no idea of what they are speaking of if they are simply suggesting sealing the surface. You need to find and ole-timer mason that understands how to fix or contact a structural engineer that specializes in brick applications to get the proper details needed to correct this issue. Otherwise you will end up destroying the brick wall even more.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 10, 2011Here is an excerpt link from BIA regarding brick re-pointing. http://www.gobrick.com/Portals/25/docs/Publications/Brick%20Briefs/Repointing%20Brick%20Masonry.pdfHelpful Reply
-
Related Discussions
Hello, I have an o,d metal trunk that has rust all over, how would you
Clean the rust off? Thanks
Old desk with hard rubber top needs help
I have a very old desk that is in great condition except for the top. It is that old, hard rubber and it has a lot of dings and gashes (for lack of a better term). I ... See more
Do colors have to coordinate for bedroom and bathroom?
I recently got overzealous and bought a shower curtain, towels and rug for my bathroom in a totally different color than I planned on doing in the actual bedroom. Doe... See more
Should I remove plaster and lathe or can I just remove plaster?
I have an 1882 Balloon construction house that has some pretty extensive plaster falling off of the lath. I know that the lath actually adds to the wall stability, a... See more
How do I remove sand paint from the walls of a small bathroom?
Thought it was clever and a great look until I realized that if you fall against the wall it would scrape worse than a fall on cement. My husband is elderly and the l... See more
Has anyone had any luck removing artillery fungus?
Please provide personal success stories on how to get rid of fungus in mulch... not links because I have googled and watched others and tried. My daughter had a load ... See more
Which do you prefer: distressed wood or natural wood?
When it comes to choosing wood for your home decor, the finish can make all the difference in achieving the look and feel you want. Distressed wood, with its rugged c... See more