restoring a 75 year old buffet...
-
Woodbridge Environmental Tiptophouse.com on Feb 04, 2012Removal of older finishes can be a bit tedious at best. With older furniture you must consider that many times they used veneers over solid wood to make the panels look like a single sheet of lumber. The trick with this type of construction is not to loosen up any of the edges or sand through these thin sheets of wood. Before you even begin, look over the entire buffet for any loose parts or veneers. If you find any, you should be considering those repairs before you even begin. You do not want to get any stripper under or between the layers of wood or joints. Also you need to know where things are loose so you do not catch the edges with any scraper or cleanup rag while removal of the paint stripper takes place. Here s a good DIY link on doing this type of project. http://tlc.howstuffworks.com/home/how-to-strip-wooden-furniture.htmHelpful Reply
-
-
Peace Painting Co., Inc. on Feb 04, 2012The only thing that takes off varnish and stain is heavy duty paste stripper. Follow that with denatured alcohol to remove the leftover sludge. Then you are ready to nuetralize the stripper vapors with a 20-25% vinegar solution worked into the wood. A light sanding will finish it up. Messy business it is. Invest in a respirator. Best, CharlesHelpful Reply
-
-
Trevor O on Feb 04, 2012Thank you gentlemen for both of your responses. I will look further into both of them.Helpful Reply
-
-
KMS Woodworks on Feb 05, 2012At 70 years old the painted surface may contain lead...so you will need to address that too. As far as stains and "varnishes" many older pieces I've worked on were finished with Shellac. This can be somewhat easily removed using alcohol. It will help you to know what type of finish is present. When I refinished this 1860's era drop front desk I did a few back to back Strips with simple cotton rags soaked in ethanol. In my case the woods were solid Mahogany and Mahogany veneers so no stain was present...once the old finish was removed I used a wiping poly to protect it for the future. I know that the old natural "patina" of some old pieces adds the the value of the piece...but in our case we actually use this piece of furniture and some of the finish damage was just too unsightly.Helpful Reply
-
-
Trevor O on Feb 05, 2012Thanks KMS. I am not thinking that this piece is as old as your roll top desk. The wood on the sides is veneered, ans some is peeling away. So I will be addressing that issue first. Thank you.Helpful Reply
-
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Will Rustoleum restore my 17 year old deck
This is my deck
Should I re-stain or paint my cabinets?
Edit:””” 3 years later😂 I decided to paint them white and I am so very pleased with the results!We bought a new house with these ugly cabinets. I really cann... See more