I have another glue question. I broke a corner off of a square wooden plate and I need to glue it back on.
-
Woodbridge Environmental Tiptophouse.com on Feb 28, 2012Good old Elmers wood glue would do the trick. Carpenters version tends to set up faster then the plan old white stuff, but both work real well.Helpful Reply
-
-
HandyANDY - Handyman & All Repairs, LLC on Feb 29, 2012Yup...carpenters glue...will set up well and cleans up easilyHelpful Reply
-
-
Yamini LEED AP at Urbanmotifs on Feb 29, 2012I have a glue questions too, sorry Lee Anne for piggy backing on your post. We glued the joints of a chair at the studio yesterday, I guess the clamp didn't tighten around it well. I can see 1/8th" gap. How can this be fixed?Helpful Reply
-
-
KMS Woodworks on Feb 29, 2012Titebond 3 is my favorite ( it has the green cap) the original titebond and version 2 had red and blue caps. the right glue will help but you will also need to "clamp it" here this can be done with some painters tape and rubber bands. Even though this glue set well in an hour or 2 I like to leave my glue ups over night for a full set.Helpful Reply
-
-
Yamini LEED AP at Urbanmotifs on Feb 29, 2012I bought 2 clamps 36" wide to fit the chairs. We are gonna glue them and clamp it overnight as well. But the presence of the old glue, will it cause any trouble?Helpful Reply
-
-
KMS Woodworks on Feb 29, 2012Yamini...one thing you might want to look into are some Ratchet strap webbing type of clamps. I have used these a lot in my shop when trying to hold together odd shaped chairs and things. clamping turned chair legs set on angles is tough with a "bar" type clamp.Helpful Reply
-
-
Dan's of Central Florida, Inc. on Feb 29, 2012Another good wood glue is the wood/carpenter's glue made by the Gorilla Glue people. It doesn't expand like the normal Gorilla Glue and holds wood very well after it had dried.Helpful Reply
-
-
Culpepper Carpets and Interiors, Inc. on Mar 04, 2012Thank you all! I have a happy ending to my saga...I used good old Elmers Wood glue and it worked well!!Helpful Reply
-
Related Discussions
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
How do you remove an oil stain from composite decking?
I moved a snow blower to my composite porch for the up coming winter. After it was moved I noticed it had dripped engine oil on the deck and it soaked into the compos... See more
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more