Any thoughts on what type of plant tag/label will last the longest without needing re-writing?
-
3po3 on Mar 04, 2012There was a discussion of plant labels a few days ago, including engraving on metal and painting on glass. Either should last quite a while. Here is the conversation: http://www.hometalk.com/activity/143625Helpful Reply
-
-
Southern Trillium LLC on Mar 04, 2012Thanks Steve, I just posted the question on that discussion thread.Helpful Reply
-
-
Southern Trillium LLC on Mar 08, 2012Thank you for the suggestions but this doesn't answer my question because the linked thread was for different types of tags, but not necessarily a long lasting label/tag.Helpful Reply
-
-
3po3 on Mar 08, 2012As KMS said toward the bottom of that thread, the stamped metal tags should last forever. Not sure what you are looking for, if not that.Helpful Reply
-
-
Southern Trillium LLC on Mar 08, 2012I knew that stamping a metal tag will last indefinitely, but I just didn't know if there is any other tag/label that will provide a long life. Sitting down with a hammer and punch to create every tag would be very time consuming, but I know they will always be there. I guess I am also thinking of labels that will be easier for others to read as they walk by. I have heard people mention using grease pencils, or even laminated UV resistant labels, but didn't know just how long those might last. Hope this helps explain my question a little more.Helpful Reply
-
-
3po3 on Mar 08, 2012Yes, thank you. Unfortunately, I don't know of any other long-lasting options that you haven't considered. Maybe somebody else will have some.Helpful Reply
-
-
Becky Broadhead on Jun 29, 2015What I have done is using Popsicle sticks I write on them with a permanent marker and then enclosing the whole thing in packing tape. the tape prevents the wood from rotting and keeps the writing bright. You could also use anything that you can write on and cover with tape. They need to be totally enclosed with the tape.Helpful Reply
-
-
Carmen Evans on Jan 25, 2016I have used lightweight aluminium drink cans and you can cut them into label size with kitchen scissors or secaturs then imprint the plant name with the point of an old pen to make an indent into the aluminium, pierce a hole in it and tie it to the plant or dig into the groundHelpful Reply
-
Related Discussions
How to kill artichoke weed?
How do you kill an artichoke weed? It's a green pointed leaf and has a white root with runners. When my grand daughter was young, she thought they were worms and du... See more
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Can I put laminate flooring over tile that has rather large grout line
house was built in 2006 all rooms have large square tile floors all the same dull color large indented grout lines can I have new floors without taking up all... See more
What can I use to glue the pennies to the top of the wood table?
I seen this piece at a garage sale this fall and thought it was a fun idea for a table top on a random little table I have. Besides asking what to use to glue the pe... See more
How do I prevent my dogs bed from sliding in her kennel?
When my dog moves around her bed moves with, thus creating a loud dog nail against plastic noise