Does anybody know what to use for filling gaps in between stairs?
-
3po3 on Mar 12, 2012What kind of stairs are you talking about? Can you post photos?Helpful Reply
-
-
Courtney F on Mar 12, 2012We purchased a "fixer upper" and it sat empty for a little more than a year. The smell was horrific, so we ripped up the carpet everywhere. There was mold from urine, so don't judge!! :) What I am trying to do is make them a little less noisy, we have been sleeping in the room right next to the staircase downstairs. My husband works nights, so tries to sleep during the day! We don't have definite plans so its just a for now fix?? I put some great stuff foam spray in between a lot of them, but there has got to be something easier? sorry the pictures are not the best!Helpful Reply
-
-
KMS Woodworks on Mar 13, 2012The creaks are due to wood movement. Spray foam is best for sealing air gaps and is not "structural". I would sink some screws down through the nose of the treads into the risers. Putty the holes and paint the stairs and risers so it is not visible. To a lesser fix some poly based construction adhesive could be applied and forced into the gaps from behind, and then blind screwed at an angle form behind as well. This would maintain the unblemished look from above...it these were stain grade hardwood treadsHelpful Reply
-
-
Stuart Forscutt on Mar 21, 2016Glue 45deg blocks underneath and add wedgesHelpful Reply
-
-
William on Mar 23, 2016Work from under the stairs. Use a 2"x2" board the length of the stairs. Spread wood glue on two adjoining sides. One for the riser and one for the tread. Screw the board to the riser first with 2" deck screws leaving about an 1/8" gap between the board and tread - about the thickness of four credit cards. Then screw the board to the tread with 2" deck screws. Deck screws have a coarser thread and will bite into the tread pulling it down tight to the riser. Predrilling the board will make the job easier. Hope this helps and good luck with your project.Helpful Reply
-
Related Discussions
Does anybody know what color blue is used for Thomas the train?
I am making a model bookcase of Thomas the train. I need to know Thomas train blue does anybody know who makes it or do I have to have it mixed .
Painted wood: yay or nay?
Let's dive into the age-old debate: painting wood. Some homeowners swear by the transformative power of a fresh coat of paint on wood surfaces and furniture, while ot... See more
Why does my bathroom tub and sink sound like it's burping when I flush
This is new for us home, but built in 1959. Kitchen sink drains slow but have not heard burps.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Quick, inexpensive fix to correct weathered,splintering wood on deck
My wooden deck is older, and the wood has started to darken and splinter. Outside of replacing the wood, is there anything I can do for a quick and inexpensive fix?
Looking for an idea to make the bookcase look flush against the wall.
It’s an Ikea Billy bookcase. The cut out for smaller baseboard doesnt work. Would like it to look flush with the wall. Would rather not have to cut the baseboard.... See more
How do I take off hard water from my tub?
Here’s my issue I have been living in the same apartment building for 18 years and I have a tub that deals with hard water on a daily basis. What is the best way fo... See more