Does anybody know what to use for filling gaps in between stairs?
-
3po3 on Mar 12, 2012What kind of stairs are you talking about? Can you post photos?Helpful Reply
-
-
Courtney F on Mar 12, 2012We purchased a "fixer upper" and it sat empty for a little more than a year. The smell was horrific, so we ripped up the carpet everywhere. There was mold from urine, so don't judge!! :) What I am trying to do is make them a little less noisy, we have been sleeping in the room right next to the staircase downstairs. My husband works nights, so tries to sleep during the day! We don't have definite plans so its just a for now fix?? I put some great stuff foam spray in between a lot of them, but there has got to be something easier? sorry the pictures are not the best!Helpful Reply
-
-
KMS Woodworks on Mar 13, 2012The creaks are due to wood movement. Spray foam is best for sealing air gaps and is not "structural". I would sink some screws down through the nose of the treads into the risers. Putty the holes and paint the stairs and risers so it is not visible. To a lesser fix some poly based construction adhesive could be applied and forced into the gaps from behind, and then blind screwed at an angle form behind as well. This would maintain the unblemished look from above...it these were stain grade hardwood treadsHelpful Reply
-
-
Stuart Forscutt on Mar 21, 2016Glue 45deg blocks underneath and add wedgesHelpful Reply
-
-
William on Mar 23, 2016Work from under the stairs. Use a 2"x2" board the length of the stairs. Spread wood glue on two adjoining sides. One for the riser and one for the tread. Screw the board to the riser first with 2" deck screws leaving about an 1/8" gap between the board and tread - about the thickness of four credit cards. Then screw the board to the tread with 2" deck screws. Deck screws have a coarser thread and will bite into the tread pulling it down tight to the riser. Predrilling the board will make the job easier. Hope this helps and good luck with your project.Helpful Reply
-
Related Discussions
Does anybody know what color blue is used for Thomas the train?
I am making a model bookcase of Thomas the train. I need to know Thomas train blue does anybody know who makes it or do I have to have it mixed .
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Cleaning mineral deposits off of glass
How do I remove mineral deposits from windows??? I've tried cleaning with vinegar on both the inside & outside of the windows...is it possible it's on the inside of t... See more
What to hang over fireplace?
Right now I have a cream colored berry wreath over my fireplace. I will be getting the picture shown over my sofa ( that is a mock up so size won't be exact). Do you... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
How clean grout from a brick ?
hello all, I just moved to my new APT and I was working on my new kitchen. part of the work is to glue the bricks on the wall 1 centimeter apart so that the grout ... See more