What is the best and cheapest way to trim a window? Plastic? Composit? Wood?
-
Peace Painting Co., Inc. on Mar 20, 2012Plastic (PVC), because you will never have to replace it again and it is easily available. Prime it with a primer for plastic because it is so hard. Other paints will work okay until they are scraped or touched with a pressure washer. CPHelpful Reply
-
-
Linda D on Mar 20, 2012This is for the interior of the house. I'm sorry I failed to mention that.Helpful Reply
-
-
Peace Painting Co., Inc. on Mar 20, 2012Wood for sure then, because it's cheaper. CPHelpful Reply
-
-
Linda D on Mar 20, 2012Thank you so much. Wood it is then. Now, how do I put it on the wall without denting it with a hammer? Isn't there a special tool you use between the hammer and the nail or is it a brad?Helpful Reply
-
-
Peace Painting Co., Inc. on Mar 20, 2012If you don't have a brad or nail gun, hammer the nail almost all the way in then set the nail just below the surface with a nail punch. Then you are ready to fill the whole with wood filler and sand smooth.Helpful Reply
-
-
Linda D on Mar 21, 2012Thank you so much. Sounds easy enough.Helpful Reply
-
-
Peace Painting Co., Inc. on Mar 21, 2012Better than hammer marks...Helpful Reply
-
-
KMS Woodworks on Mar 21, 2012Actually for "paint" grade MDF is often cheaper. Wood can run a $1 or more per LF...while a full stick of MDF can be had for 4-5 bucks. I trimed out a whole house of windows with 1 x 4 MDF painted white this is a good match for the white vinyl windows...Helpful Reply
-
-
Michelle E on Mar 21, 2012About as in expensive as MFD...if you are talking interior trim - find a ReNu store (habitat for humanity store), you can get a stick of wood trim for $4-$8 and it will hold up much better than MFD in the long run.Helpful Reply
-
-
Linda D on Mar 21, 2012Great idea and I love the greenhorn method, that's me. I guess you could tell though, huh? :-) Thank you so much for all your help.Helpful Reply
-
Related Discussions
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
How do I cover the edges of a cracked mirror?
I have a mirror tall and slender that has beveled edges and one side has chips out around the edging and I don’t know how or what to make a frame with to cover it. ... See more
How do you get rid of fruit flies from the soul of your plant?
There are fruit flies all over my plants.
How do I decoupage old glass bulb covers from light fixtures?
I need ideas for updating hanging light fixtures in kitchen then have the brass colors and clear glass cone bulb covers. I’d like to decoupage the glass covers ?