Is peeling paint on house due to poor paint job or too much rain/water?
-
Clay B on Apr 02, 2012Could be many factors. Too many layers of paint, gets heavy, and can peel and fall off. Sometimes the wood needs to be sanded so primer and paint can stick. If wood was wet or contained too much moisture before you painted, that can cause peeling. Is water getting behind the wood? What type if siding do you have, shingles, clabboards etc? Was was on the surface before you painted, old paint, if yes, was the old paint sticking and not peeling? If you put oil based over latex, that would be problem. Latex over oil based is ok. SInce it's only where your garden is, it's probably getting way too much direct water, and the water is getting behind the wood siding.Helpful Reply
-
-
Peace Painting Co., Inc. on Apr 02, 2012Could this be the afternoon sun side too? A picture would be nice.Helpful Reply
-
-
Ginny C on Apr 02, 2012It is the the afternoon sun side. It's wood siding, not sure about the kind of paint but I think it was water based. The wood is so wet where it's been peeling that I can actually press into it with my fingers. If I get it to try out would I be able to do an inexpensive repair on it? The rest of the house is ok so it must be the amount of water over the past couple years. I'd like to be able to hold off an expensive repair until I can decide whether to put some other type of siding on the house.Helpful Reply
-
-
Peace Painting Co., Inc. on Apr 02, 2012Minwax makes a wood repair kit which is like bondo. You can also first brush on their wood hardener which is a wood fortifier or solidifier that bonds loose wood fibers together. Start by digging out the soft parts when dry, brush in the wood hardener then use the wood repair kit paste. Then caulk up the wood joints. This will give you one or two years of a patch until you decide. Best, CharlesHelpful Reply
-
-
Ginny C on Apr 02, 2012Thanks for the answers, but I'm still hoping for more ideas.Helpful Reply
-
-
Peace Painting Co., Inc. on Apr 03, 2012Ginny, the other loose paint areas need to be scraped and sanded until only firm paint remains. After washing and thoroughly dried, use oil base primer on the bare areas. Then you are ready to brush/roll apply two coats of top-line finish paint for the best protection. CPHelpful Reply
-
-
Ginny C on Apr 03, 2012thanks allHelpful Reply
-
-
Clay B on Apr 03, 2012If you can press your finger into the wood, you need to replace the siding in that area. Better to replace the siding before it rots the plywood/structure underneath that.Helpful Reply
-
-
Pam on Apr 20, 2012Did your painter use oil or latex base paint?Helpful Reply
-
-
Clay B on Apr 23, 2012One more thought, once siding is fixed, think about watering with a soaker hose.Helpful Reply
-
Related Discussions
What are your most dreaded household chores?
Let's face it, household tasks are a part of life, but that doesn't mean we have to love them, right?We all have those duties that we'd rather avoid at all costs. So,... See more
How can I make affordable arm covers for new chairs?
I’m redoing my living room and giving it a completely new, slightly glam/modern farmhouse look. Neutral Color scheme will be white, grays, a little black, touches o... See more
How can I refresh an old ugly lampshade?
How can I refresh an old cloth lamp shade that has just gotten stained & ugly over the years. The shade is a strange shape so I need an easy solution. Any ideas? Than... See more
If I put bleach in my fountain to kill mosquitos will it harm the bird
Rocking chair
I bought this rocking chair 31 years ago when my son was born. It's time to do something with it. Looking for ideas.
How to remove burnt pasta stuck at the bottom of a pot?
Burnt pasta stuck at bottom of pot - how to clean a burnt pot to remove the food?