Pallet TV Stand
![Dami B](https://cdn-fastly.hometalk.com/media/profile/2016/01/10/472841_6.jpg?size=91x91)
by
Dami B
(IC: homeowner)
6 Materials
My friend showed me a Pinterest Pic and asked, "Do you think you can help make something like this tv stand?"
And I SAID, " OH YEAH!!! Let's do it!"
And I SAID, " OH YEAH!!! Let's do it!"
I got 3 free pallets from my local ACE Hardware store.. we washed them clean.
My always willing helper, Josh, helped to take them apart.. this was a time consuming task. We tried the crow-bar method first.. but those nails weren't going anywhere. So, we used our handy Ryobi reciprocating saw and cut the nails off instead.
We kept the pallets at 48" long and we cut them to 24" wide.
We removed the slats from the top of the top pallet and the top of the bottom pallet. To break up the look I added the supports from the 3rd pallet to create a 2nd shelf, without added the weight of another pallet. Before I redid the top of the bottom slats, spaced them out a bit, I attached the middle support to those slats with 3" screws (because that's what I had) from the bottom.
We placed the top slats side by side so there won't be any gaps. We used the extra slats from the 3rd pallet to fill out the top. Here is the dry fit look.
Then began the dirtiest part.. sanding EVERYTHING. I lied THIS was the hardest part and NOT fun at all. After I sanded all the parts, with 80 Grit Coarse.. the staining party started.
I stained everything first with Minwax Wood finish, Provincial 211. Then I sanded the top a with 220 fine grit, and stained it with Varathane Stain & Poly, Cabernet semi-gloss, to make it pop from the rest of the wood. After I stained everything I went back and sanding some more to give it a little bit of an aged look.
I did 3 coats of Minwax Polycrylic Semi-Gloss BasePolyurethane...
I didn't like the way the bottom pallet looked after it dried.. SO.. I just sanded the heck out of it and re-stained it with the red stain.. it didn't look like the top and that's fine, but it did give it a nicer tone. At the end though, as my son reminded me, it didn't matter cause no one will see it. So once everything was dried it was it time to put the pieces together.
Sorry, I forgot to take pics, as I was exhausted and my helper was in school. My mom stepped in to help, but I didn't have anyone to remind to stop and take pics.
I added 6" Solid Pine Finish Parsons Legs from Home Depot with Waddell Table Leg Hardware from Lowes, and stained them.
Here she is in all her glory... and yes my friend LOVED it!!
Enjoyed the project?
Suggested materials:
- 3 Pallets (Ace Hardware Store)
- Stain (Home Depot)
- Wooden Legs (Home Depot)
- Wooden Dowels (Home Depot)
- Liquid Nails (Home Depot)
- Waddell Table Leg Hardware (Lowes)
Published May 2nd, 2016 5:19 PM
Comments
Join the conversation
2 of 29 comments
-
Carol Cole on Apr 22, 2019
I can't get over this. I love it. It is a very serving project. You did wonderful. I think it is a great, just wonderful.
-
-
Carol Cole on Apr 22, 2019
That is so neat.
-
Frequently asked questions
Have a question about this project?