Broken Dresser Leg, How to cut so all are same size?
Thought I could get a clean straight cut with my electric miter saw, but dresser/other legs are in the way and my blade can't come down.
So used a t to measure and make a cut with my jig saw, but not straight.
Then tried to make a cut with my circular saw, and same problem.
So now I have 4 legs cut, all different lengths. Noticeable......unbalanced, but not ALOT, just enough to make it not balance. And all the legs are a bit different. With each leg the back part is longer/shorter then the front.
These need to be evened out.....HELP, SUGGESTIONS WELCOMED!
-
Cynthia on Jun 24, 2013Take a string and wrap it around the outside of the legs. Attach a level to the string (clip on) to check the line. Mark and then take them to cabinet shop and pay for them to be cut. If you made a guide you could cut them by hand, but not as easy as you think. Pay the few bucks and have it done. Avoid home depot as they do not measure things accurately.Helpful Reply
-
Related Discussions
How do I clean off Black toilet bowl crust?
Hello, how or what can I use to clean the bottom of my toilet bowl? Is has a black crust
Can I apply stick & peel backsplash on a stucco texture wall?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Is it true if you put cedar chips around your house it will keep insec
We have Boxelder bugs under our siding and they make us completely miserable during the summer months. We also have bees under our sighting. Can someone tell me how t... See more
Why does my bathroom tub and sink sound like it's burping when I flush
This is new for us home, but built in 1959. Kitchen sink drains slow but have not heard burps.
Quick, inexpensive fix to correct weathered,splintering wood on deck
My wooden deck is older, and the wood has started to darken and splinter. Outside of replacing the wood, is there anything I can do for a quick and inexpensive fix?
How do I remove paint from painted tile and tub?
How should I remove paint from a tile floor and a bathtub?