After stripping old wallpaper tried to prime and paint but seemed to get bubbles under a thin layer of paper.
-
Woodbridge Environmental Tiptophouse.com on Jun 04, 2012What happened is you did not get the thin layer of wall paper off and the residual glue that holds the paper to the wall has reacted to the latex paint and softened up. You need to sand the bubbles now, and use a oil base primer to seal the wall. This will help prevent any future reactions of moisture that has caused the old glue to swell up. You may need to spackle the bubble areas to smooth things up. But do this after you prime and it has dried. Once dry spackle the areas, then prime those areas to bring the wall back up to a level surface so the patches do not show through your final coat of paint.Helpful Reply
-
-
Peace Painting Co., Inc. on Jun 04, 2012That's right, oil primer. Now, cut out the bubbles and prime again with oil. Then you can start your wall repair with a final prime of latex. With old paper, it's a multi-step process, sometimes going over the same area multiple times.Helpful Reply
-
-
Bill on Jun 19, 2012Did the bubbles go away or deminish some what after the paint dried? If so then the paper face on the sheetrock got lifted when the paper was removed. It's common to occur when dry-stripping the top layer to make wetting down then removing the backing easier. There's a water-based product made by Zinsser called Gaurdz that was made just for that problem. You cut out the blisters with a razor knife then apply the product. Once dry you patch the areas, retexture the spots if needed then repaint. Zinsser's website will have all the info you need.Helpful Reply
-
Related Discussions
How can I remove labels from coffee cans so I can upcycle them?
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more
How to get rid of bugs on raspberry bush without pesticide?
How can i upcycle rigid foam packing blocks?
how can i upcycle rigid foam packing blocks?
How do I get rid of moles, voles and chipmunks?
They dig holes, have tunnels and throw dirt all over. how can I get rid of chipmunks, voles, and moles with natural easy to find ingredients?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more