742 Views
DIY Wall Clock
![Dria @ Dio](https://cdn-fastly.hometalk.com/media/profile/2017/05/02/142924_1.jpg?size=91x91)
by
Dria @ Dio
(IC: blogger)
I had seen a clock similar to this but it was all metal and going for around $300.00 way out of my price range so I decided to make my own version. Super easy and inexpensive this cost me nothing since I had all the materials in my house.
I used a scrap piece of wood, some nails, twine, coat hanger, old clock mechanism, screws, hot glue and paint. I painted the board, added the metal rectangle in the middle from a coat hanger that I cut up and attached to 4 screws, used the twine to make the numbers, I put each strand through the metal rectangle attached each piece to a nail then hot glued the twine tails to the back!
I used a scrap piece of wood, some nails, twine, coat hanger, old clock mechanism, screws, hot glue and paint. I painted the board, added the metal rectangle in the middle from a coat hanger that I cut up and attached to 4 screws, used the twine to make the numbers, I put each strand through the metal rectangle attached each piece to a nail then hot glued the twine tails to the back!
Enjoyed the project?
![Dria @ Dio](https://cdn-fastly.hometalk.com/media/profile/2017/05/02/142924_1.jpg?size=91x91)
Want more details about this and other DIY projects? Check out my blog post!
Published August 12th, 2013 12:18 PM
Frequently asked questions
Have a question about this project?