Want to build a flower box for my patio; where would I find plans on t
-
KMS Woodworks on Aug 28, 2013Building a box is pretty simple...so detailed plans are not really needed. More importantly are the material choices used to build it. Soggy dirt is very heavy and if thinner stock is used it can bow out and self destruct in a few years time. Wet soil against wood is also a quick road to failure do to rot. Lining the box with metal will help a lot in the rot dept. A flower box 5 feet long and 16" deep and 18" wide is HUGE and would weigh in at hundreds of pounds when filled with dirt. Remember that a 40 pound of potting soil is only .5 cu feet. Your dimensions would require at least 10 to 15 bags. This is 400 to 600 pounds worth. Once filled it will be near impossible to move about. Some folks will fill the lower parts of a big box with sytrofaom packing peanuts, then layer some landscape fabric over this. This greatly cuts down on the weight and soil needed. It is important though to use the old style "Styrofoam" not the newer "green" versions made from corn starch ( these dissolve in water).Helpful Reply
-
-
Betty819 on Aug 28, 2013I have a picture of what I want it to look like which came from a magazine that has the Initials as FC and date and I assume it is from Family Circle magazine about 5- 10 years ago. Only the picture and I know most outdoor flowerboxes are usually made of cecar but know that wood is very expensive. Somebody suggested douglas fir but I'm not familiar with it and don't know if it is available in our HD or Lowe's store and how expensive it is. The idea would be pressure treated wood, but it will be so heavy but at least will hold up under the elements. If I did it out of pressure treated wood, and wanted to paint it white or a color, would I need to prime it first or put a sealer on before or afterwards, then a final coat of whatever color I choose?Helpful Reply
-
-
KMS Woodworks on Aug 29, 2013Cedar is available in 3/4" thick stock as well as 1 1/2" thick ( the nominal 2 x stock). I have only seen Pressure treated available in 2 x (PT plywood is an option). PT often is quite "wet" when new and needs to dry well before it is painted this can vary from 6 months to a year based on you climate. Ideally the inside should have a metal liner.Helpful Reply
-
-
Betty819 on Aug 29, 2013I know what you mean about being "wet" as we have run into that when building our screened in porch/deck back in 1995.Helpful Reply
-
Related Discussions
Can I decoupage my toilet seat what is needed to do this?
I rent but I hate the carpet in my master bedroom what can I do?
The carpet is stained and gross I have lived here for 6 years. Should I rip it out and change it without asking my landlord or can I suggest that I will pay for putti... See more
Can I hang a dresser mirror on my bedroom wall?
How to use a mirror from a old dresser can it be hung on a bedroom wall?
I'm trying to hang a curtain rod over a sliding glass door, but keep hitting something that I can't drill through.
The house is built of cement blocks, but there is drywall on the walls. I had another house that was the same type, but never had a problem with hanging curtain rods.... See more
Can I use my hot glue gun to stick crystals to mirrors?
I have a set of round frameless mirrors and I would like to create a pattern across them with crystals, I'm just not sure which glue is best, thank you.
How can I darken the color of painted furniture using varnish?
Hi, I just paint my outdoor dining set, but the color is a little lighter than what I want. I am planning to apply varnish on them and I was thinking to take advantag... See more
Can a water based varnish be used on chalk paint?
Is it possible to use a water based clear varnish instead of the finishing wax on chalk painted furniture? I love the look of distressed chalk paint but I'd like a sa... See more