94K Views
DIY Leaning Mirror
by
Anne Davidson
(IC: blogger)
6 Materials
When you live in a small space one of the ways to add visual room is through the use of wall mirrors. I liked the look of long leaning mirrors that sit on the floor and lean against the wall such as this one from West Elm or this one from Pottery Barn. Instead of purchasing the mirror I decided to outsource it to my husband to create a similar inexpensive version.
He purchased two 24" 1 x 6 pine boards for the top and bottom of the frame and two 58 and 1/2 inch boards for the sides. You can have them pre-cut to your specifications at Home Depot or Lowes. For the back a piece of plywood was cut 17 1/4" x 61 1/2." The finished height of the mirror was 69.5" tall by 24" wide.
Then the wood was stained with Minwax Dark Walnut, and a coat of polyurethane applied afterwards.
A krig jig was used to drill the holes to attach the wood in the mirror's frame. Then the negative space for the mirror was measured inside the frame.
We purchased the mirrored glass at a local glass supply store, Capital City Glass. I've seen some versions of a leaning mirror done with a smaller Ikea mirror, but I wanted a taller mirror with thicker glass for a more sturdier look.
Read the rest on my blog.
Enjoyed the project?
Suggested materials:
- Pine boards
- Glass
- Screws
- Poly
- Minwax Dark Walnut stain
- Router
Want more details about this and other DIY projects? Check out my blog post!
Published September 19th, 2016 10:02 PM
Comments
Join the conversation
3 of 10 comments
-
-
-
Anne Davidson on Oct 08, 2016Thanks! Let me know if anyone tries this project or has a similar idea!
-
Frequently asked questions
Have a question about this project?