Lifted veneer on old dresser
-
KMS Woodworks on Oct 02, 2013Many veneer repair can be done by lifting the damaged area and forcing some wood glue into the space. Often a thin putty knife or xacto blade can be used to lift up the wood. After the glue is applied some painters tape and weight can be used to hold it down while the glue dries. squeeze out can then be lightly sanded after its fully dry.Helpful Reply
-
-
Sheila on Oct 05, 2013The veneer is buckled in one spot so I won't have to lift it to get the glue in. I think I should have some clamps in the garage to help hold it together until it dries. Thanks for your help!Helpful Reply
-
Related Discussions
When did veneer come into play with furniture? I have an old dresser that is supposedly from the late 1800's and it has
veneer.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Quick, inexpensive fix to correct weathered,splintering wood on deck
My wooden deck is older, and the wood has started to darken and splinter. Outside of replacing the wood, is there anything I can do for a quick and inexpensive fix?
Looking for an idea to make the bookcase look flush against the wall.
It’s an Ikea Billy bookcase. The cut out for smaller baseboard doesnt work. Would like it to look flush with the wall. Would rather not have to cut the baseboard.... See more
How do I take off hard water from my tub?
Here’s my issue I have been living in the same apartment building for 18 years and I have a tub that deals with hard water on a daily basis. What is the best way fo... See more
How do I remove paint from painted tile and tub?
How should I remove paint from a tile floor and a bathtub?
What can I use to stop flies from collecting on my new deck?
My deck is new , I was told flies are attracted to the sap of the wood,.