134K Views
Wall Treatment for Less Than $50
![Unexpected Elegance](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/94779_1.jpg?size=91x91)
by
Unexpected Elegance
(IC: blogger)
5 Materials
We have lived in our current home for almost 8 years, and in that time, I haven’t done much to our dining room. When we moved in the walls were a tan and dark brown, with an oddly placed chair rail. A few months ago I decided it was finally time to update the walls, and I wanted some texture without spending a fortune. So, I came up with this cost efficient solution.
The picture above is the before.
I bought three 4′ x 8′ sheets of 5mm thick plywood. Then I had them cut into 3″ strips at the hardware store.
I made a template for the spacing and cut enough pieces for one wall. Then I measured the height of the wall from the top of the baseboards to the ceiling and cut all my long pieces.
I used a nail gun and didn’t want to worry about hitting a stud every time, so I made sure all the pieces were attached close to the ceiling.
Once I had all the wood up on the walls, I installed crown moulding at the ceiling to hide all the imperfections and gaps at the top, but you could skip this step. I used a paintable caulk around all the pieces to fill in any holes or gaps and painted everything the same color.
So, here’s the finished walls!! They turned out even better than I had hoped. They give just the right amount of texture and create interest.
For more detailed directions and tips, be sure to check out my original blog post!
Enjoyed the project?
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
![Unexpected Elegance](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/94779_1.jpg?size=91x91)
Want more details about this and other DIY projects? Check out my blog post!
Published November 18th, 2016 7:43 AM
Comments
Join the conversation
2 of 62 comments
Frequently asked questions
Have a question about this project?
I love this! But, as I am a terrible decorator, can I hang a picture on this wall or would that look bad?
I am asking the community their opinion. Our house has natural light brown wood trim throughout. I want to do this wall treatment in a guest room on a wall that has two windows (one on each side of a king bed).
1. Do I paint ALL four wall and window trim in the guest room white?
2. Or do I leave all the window trim natural and just paint the new wall trim white?
3. Or do I paint all the trim on the updated wall white and leave the other three walls with the natural wood trim?
I am open to all your opinions.
Would you be able to use wood slats , that are already cut & smooth ?
This is a beautiful upgrade.