Cabinet Drawer
Enjoyed the project?
Comments
Join the conversation
-
Jean on Jan 31, 2018
U can buy the hold thing at Lowe’s. That is what I did. And I put them in myself. Everything comes with it. I got 2. Then got more.
-
-
Gabrielle Falk on Feb 02, 2018
I do something similar. Rather than chopping up a plastic box, what I do is go to the '$2' shop and buy various sized plastic baskets, making sure that the bottom is solid - ie not a 'woven' bottom, so that if there are any spillages, the spill won't go through the bottom, and pool on the floor of your cupboards, and given enough time, leak through to the underneath which is mainly MDF (medium density fibreboard); which then swell with the spilled moisture. Do the same in the 'fridge. Easier to pull out a plastic basket, with similar items, ie cheeses, or liquids, than rummage around in the back of the 'fridge, if something has fallen over.
-
Frequently asked questions
Have a question about this project?
What’s the actual hardware used? The one they posted are side mounts, not from underneath as in the tutorial. Thanks!
why didn’t you use two bottom gliders on each side? I would think that using just a center glider would mean you need to “balance ” the load so that one side is not heavier than the other
I'm missing something here...why did you cut a hole in the top? In the final picture it looks like you're just using the bottom. Also, are you planning to put more tubs above that one? Sorry it doesn't seem clear to me.