No hot water in one bathroom

Tri7233841
by Tri7233841
When you turn on the hot water there’s a lot of noise but no water.

  5 answers
  • Ellis Ellis on Oct 09, 2017

    If it's in all the fixtures in that bathroom, it's the hot water pipe leading there. If it's only one fixture, it's that particular fixture's hot water pipe or the faucet. You're probably going to need a plumber.

  • Sharon Sharon on Oct 09, 2017

    Time for a plumber

  • Cindy Cindy on Oct 09, 2017

    It sounds like you have air in your line. That's probably what's causing the noise. But the no water issue is another story. You should really call a pro for this one.

  • Mary Mary on Oct 09, 2017

    To find out if you need a plumber and you are a little handy switch the lines under sink. Put the cold to the hot and hot to cold. If the hot water comes out the cold faucet side it is your faucet, if cold comes out the hot water side it is your faucet, but no hot on the cold side you need a plumber

  • Wendy Wendy on Oct 10, 2017

    Good luck!