1.3K Views
How to Make a Ceiling Beam
by
Follow your H
(IC: blogger)
I built a beam in my basement to contain lighting. I used plywood and made it look as if it had dovetails joints. First I set up supports for the beam to be attached to, then the beam was screwed into those supports. The wiring for the lights runs along inside the beam. To make this easier to wire, I left one side of the beam open until the lights were installed, then the beam was closed up.
This is the beam I built in my basement. It has a faux dovetail joint and four lights inside. Visit my blog for the details.
This is the support for the beam, 2x2s screwed into the ceiling joists.
I put pot lights inside the beam, easy to do with one side open.
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published April 12th, 2014 8:15 AM
Frequently asked questions
Have a question about this project?