How many coats of primer do I need to apply to my kitchen cabinets before I apply the paint?
-
Hudson Designs on Aug 12, 2011Hello Susana, Sand the cabinets before you apply the primer, then a light sanding after will help if you apply a heavy coat of primer. Normally if it is a good brand of primer you should only need one coat. Do not use a cheap primer!!!! This will leed to a failed paint job every time.Helpful Reply
-
-
T&K Construction on Aug 12, 2011Hudson is right about the sanding. Behr makes a very good paint with a primer in it. I used it on some cabinets I painted recently for a client. You can purchase it at any Home Depot. I wouldn't normally use the product because like Hudson I believe the prime is the most important step. The client provided the paint so I used it. The cabinets look very nice and the paint is holding up very well. The best method I've found is to apply several thin coats applied with a smooth foam roller.Helpful Reply
-
-
JL Spring & Associates on Aug 12, 2011These Gents are right on the mark. I always do a light sand or steel wool between the process and I get a nice shine...I always use a high gloss enamel and the foam mini roller works great with polys too. Make sure you post some pix Susana...Best to you, JLHelpful Reply
-
-
Peace Painting Co., Inc. on Aug 12, 2011Susana, are these cabinets of raw wood?Helpful Reply
-
-
Kimberly Lacy on Aug 13, 2011Susana, you are getting great advice. Sand, Prime, then Paint. Changing the cabinet hardware is also a great way to update old boring cabinets. THere are a lots of types of cabinet Hardware options out there. Have you chosen hardware yet? Take your time and keep in mind the style of your home.Helpful Reply
-
-
Dan's of Central Florida, Inc. on Aug 13, 2011Certainly prime it - I suggest two prime coats. 1. Clean off any "foreign matter" that may be stuck on to the cabinets 2. Sand down the cabinets well with a fine grit sandpaper. Sand everything, every spot, every edge. A bad sand here will make it easier for the paint to scrape off in the future. 3. I have used a type of product called "deglosser" which is a liquid you can apply to the surface (with a rag or something similar) which will degloss the surface, as the name implies, and also etch micro-divots into the cabinet surface (much too small to see or feel). This will aid in paint adhesion. 4. Clean off any sanded material. 5. Apply two coats of a good, high quality primer. 6. Apply your finish coat (high quality grade). Use a little foam roller to help make the paint lay flat.Helpful Reply
-
Related Discussions
Hi, do I need to put a top coat on my painted kitchen cabinets?
Which room would you pick for a room makeover in your home?
We're curious, if you could redesign any room in your home, which is the room you would choose?Whether it's your cozy living room, your bustling kitchen, or even your... See more
How to find out the value of antique furniture
My husband and I are looking to sell his grandmother's dining room set but, we have no idea what to ask for it. We could not find any markings as to who made it, all ... See more
How can I get the actual grass clippings out of the sock?
Help - I have tried everything! I can't get the actual grass cuttings out of my sons socks!Best socks!If you need new socks Dickie's moisture control socks are the o... See more
How do I remove the stubborn stains from gas stove?
How do I remove the stubborn stains from gas stove?