panelled office
by
Philip C
raised panel office using router
Advice:
Don't put your finger in the router--it is the most dangerous tool there is! This project requires a lot of premeasuring and planning.
this was a learning experience...but thankfully there is a lot of online advice on routing and building raised paneling, this is an advanced project because of tools involved.
Materials:
pine 1X8 inch paneling, 1X8 inch plywood, liquid nails, 1X4 inch nails, router - $0.00
Advice:
Don't put your finger in the router--it is the most dangerous tool there is! This project requires a lot of premeasuring and planning.
this was a learning experience...but thankfully there is a lot of online advice on routing and building raised paneling, this is an advanced project because of tools involved.
Materials:
pine 1X8 inch paneling, 1X8 inch plywood, liquid nails, 1X4 inch nails, router - $0.00
Wall sconces brighten the paneling
Comments
Join the conversation
2 of 5 comments
-
I probably shouldn't have admitted that.
-
Philip, this is awesome. I also looked at your other projects. Are you a designer, or you just have a great aesthetic sense?
Frequently asked questions
Have a question about this project?