overhead lights
-
3po3 on Nov 09, 2012Can you post a photo? Why can't you run the wires in the ceiling?Helpful Reply
-
-
Sandra W on Nov 10, 2012Here are some photos. I will try to describe. There may be a possibility that we could go through the attic on the kitchen ceiling side, and get the wires down to the area. But since this is a support wall and the place I need the lights seems to be the same width as a 4" piece of lumber, how would the wires get through that piece of wood?Helpful Reply
-
-
KMS Woodworks on Nov 10, 2012You could run a type of pendant light, but not a can light like in the kitchen room. You would need to drill trough the "header / sill " plate of that wall. the trick will be to find a light that will fit within the 4 1/2" wide mounting surface.Helpful Reply
-
-
Sandra W on Nov 10, 2012I didn't really want can lights. I was thinking of maybe some pendant lights as you suggested.. But I know I will not be able to find any that the plate for the light will fit in that 4 1/2 in surface. I am hoping someone really clever will have an idea. Maybe even a decent looking track light?????? Appreciate your comments and help.Helpful Reply
-
-
LandlightS on Nov 11, 2012Sandra.....a very simple solution for your situation, If you have access to an electrical source on a wall very near the location of the beam, run a circuit to the beam and install a track rail. The you can add a pedant adapter and have you choice of a multitude of pendant lighting fixtures. For examples, look at these companies web sites....search under pendants and/or track lighting. All of these companies have a Low Voltage pendant adapter for the track, And all of the fixtures will be dimmable. www.waclighting.com/ www.techlighting.com/ www.accesslighting.com/.. www.lbllighting.com/ Have fun and I hope I was help in lighting up your life GaryHelpful Reply
-
-
Sandra W on Nov 11, 2012Gary...I think you may have solved my problem. Yes, there are outlets at both ends , counter high where these lights will go. I am sending your info to someone and maybe they will be able to do it using the fusion jack system or the Quick Connect system that is on the sights you mentioned. Thanks much.Helpful Reply
-
-
LandlightS on Nov 11, 2012Sandra...I glad you answered as I couldn't find this post. I'm not use to the new Hometalk...I searched through lighting, kitchens and even entered "trac rail" in the search box. I glad I was able to help. Tell them to use a live-end connector as close to wall with the electrical outlet. I would, if room permits, expand that single gang box holding the outlet to a double gang junction box using the outlet to supply power to the dimmer control, mounted in the same junction box, and feed the line to the top of the ceiling/beam area to the live-end connector to the trac. You may have a little dry wall work, but you will also have your pendant lights. If you need any additional help or info, contact me at landlights@gmail,com GaryHelpful Reply
-
-
Sandra W on Nov 12, 2012Gary.....I have copied and printed your instructions to give to whomever we find to do the work. Once again thanks for all your help. Sounds like you know your stuff.Helpful Reply
-
-
Midlantic Contracting LLC / Midlantic Electric Inc on Nov 12, 2012You mentioned an attic above the kitchen. If there is access to it then this looks to be a very easy installation. Any decent electrician should have no problem with this installation. Track mounted pendant lighting is perfect for this location. The area behind the vaulted wall with your iron style decoration should give you full access to all areas below it.Helpful Reply
-
Related Discussions
How do I remove the stubborn stains from gas stove?
How do I remove the stubborn stains from gas stove?
Is there any way to get scratches off of a plastic toilet seat cover?
How to make solar pool covers with pool noodles?
I saw small “Solar” pool covers made with pool noodles and black garbage bags. I was hoping to find the directions again.
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How do I stop the pitting on my stainless steel refrigerator?
I have a 7 month old Frigidaire brand stainless steel refrigerator and I noticed pitting and rust spots numbering somewhere around 30 or 40. Is there something I can... See more