I have a single lever faucet in my shower. I need to know how to get the handle off so I can remove the face plate.
-
3po3 on Dec 20, 2012Most faucets I have seen have a set screw that can be removed with an Allen wrench. It's probably in that little hole you are talking about.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 21, 2012Steve is most likely correct. Small set screw in that hole. Sometimes very small regular screw and then even some other times simply a little pin that gets pushed up to release the handle. But my bet is set screw. When replacing the face plate. Use plumbers putty. Roll it into a long hotdog shape and wrap it around the entire face plate along the edge. However leave a small gap where the bottom would be so if any water does leak past the putty once on the wall, it has a place to escape. Push the face plate into place. Once fastened in, simply rub off what ever putty seeps out around the edges. Put your handle on and your done.Helpful Reply
-
-
KMS Woodworks on Dec 21, 2012That screw is really small...like a 2 or 3mm... 1/16 ". I would advise not using plumber's putty if you have a natural stone shower. I have seen where the component "oil" that keeps plumbers putty pliable bleeds into unsealed stone ( in this case granite) and left staining. A better alternative is to apply a generous bead of clear caulk during the install. The stuff that goes on white and dries clear. just like with the putty leave a small 1/2" gap at the bottom for drainage.Helpful Reply
-
Related Discussions
What would you do with a Space between a shed and a fence.
this picture taken around 3pm so it does get some sun, not a lot tho. Which plants, just what in the heck do you do with it?
Help for my Christmas cactus?
I inherited a Christmas cactus from my very green-thumbed grandmother about 6 months ago. She lived in SC and had a greenhouse, but I live in NC and don't. I've kept ... See more
Santa Mop Head Instructions
Does anyone know where I can find instructions for this specific Santa mop head project? I've been unable to find anything except the image in my searches. I've tried... See more
How to make a Christmas bow with wired ribbon?
How do I make a Christmas bow out of wired ribbon for Christmas? I’d like to make pretty bows for my Christmas gifts and arrangements. I’d like it to be full and ... See more
Ideas on How to Make Realistic Tree Bark? Artificial Christmas Tree...
I would like to trim the pine needles on some of the branches to look more open and realistic but I would like to first figure out a way to disguise the metal pole to... See more
How to make a Christmas bow tree topper?
How do I make a bow topper for my Christmas tree?
How do I attach pool noodles to a wooden bridge?
I am making "witch legs" using pool noodles and I want her to look like she has "crashed" on my wooden bridge in front of my house that leads to my mailbox. Thanks fo... See more