We just had sidewalks poured a week ago.
-
Bob and RodMan S on Dec 07, 2011Give your contractor a chance to evaluate and take care of the problem. Concrete goes through a "chemical" process as it hardens and cures - it does not "dry" as we think of paint drying. Typically the freshly poured concrete is kept wet or damp as it hardens since the water is actually incorperated into the material as it hardens. If your sidewalk was covered unevenly with damp blankets the surface could reflect the differences in hydration in the blotched pattern illustrated. An on site review by your contractor or another concrete professional should determine if a surface cleaning with one of the standard concrete cleaners will take care of the problem without other damageHelpful Reply
-
-
Harold M on Dec 07, 2011If it was freezing when he poured it, did they add calcium? Thats an old trick we used to use in upstate New York to keep it from freezing during curing. Of course we were pouring footers not sidewalks. I'd probably wait and see if it comes off after curingHelpful Reply
-
-
Stephanie B on Dec 07, 2011I did call the contractor...he said he did add calcium. It was not freezing when he poured...maybe 45-50 degrees, of course cooler at night. He said the white marks happened because of the blankets he had to cover the concrete with? He wasn't willing to come and look or do anything about it...so not really helpful in making me feel better. I am hoping it goes away like he seems to think...it really looks worse then this pic even shows.Helpful Reply
-
-
Frye finish carpentry & handyman services on Dec 07, 2011You should be fine that will wear off ,That's just the lime in the concrete,and an imprint of the blankets,Nothing to worry about,they look nice.Helpful Reply
-
-
Paul M on Dec 07, 2011Over time the white marks will diminish or even go away completely. However you can speed up the process by cleaning with muriatic acid. Considering your temperature there and the fact that the concrete is new I would wait until spring to do it so you can let it weather a bit and cure some more as well. It takes several years for concrete to reach its full cure strength and when it is cold it takes even longer because the chemical reaction is slowed. When you weather begins to warm use some diluted acid and a stiff brush on a pole, douse it good and scrub a bit, then rinse thoroughly. It may take a few shots but it should come clean. If it doesn't you may want to consider using a concrete stain. Good luck!!!Helpful Reply
-
-
Amazing Improvements and Garages on Dec 10, 2011Vinegar. Instead of muriatic acids. They are less aggressive and will allow the moisture to "vent" as it dries. There was another thread earlier this year and it came down to vinegar. Dampen the surface with water, apply the vinegar and allow to sit in the sun..... it will clear up. Good Luck!Helpful Reply
-
-
Paul M on Dec 10, 2011Well that would probably work too. I have never tried it but vinegar is an acid as well although much milder. Most commercial professionals use muriatic acid but then again they are in a big hurry to get off the job too.Helpful Reply
-
Related Discussions
GNATS - How to get rid of them?
Somehow my house and garden got tiny gnats that killed my fuchsia plant and fly everywhere. I have tried ALL the Web recommendations - soap and oil dishes, sand in th... See more
Can I decoupage my toilet seat what is needed to do this?
I rent but I hate the carpet in my master bedroom what can I do?
The carpet is stained and gross I have lived here for 6 years. Should I rip it out and change it without asking my landlord or can I suggest that I will pay for putti... See more
Can I hang a dresser mirror on my bedroom wall?
How to use a mirror from a old dresser can it be hung on a bedroom wall?
I'm trying to hang a curtain rod over a sliding glass door, but keep hitting something that I can't drill through.
The house is built of cement blocks, but there is drywall on the walls. I had another house that was the same type, but never had a problem with hanging curtain rods.... See more
Can I use my hot glue gun to stick crystals to mirrors?
I have a set of round frameless mirrors and I would like to create a pattern across them with crystals, I'm just not sure which glue is best, thank you.
How can I darken the color of painted furniture using varnish?
Hi, I just paint my outdoor dining set, but the color is a little lighter than what I want. I am planning to apply varnish on them and I was thinking to take advantag... See more