Can you stain over an area where you had to use wood filler or do you
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Can you apply a varnish over an oil based stain when using pine?
Should I re-stain or paint my cabinets?
Edit:โโโ 3 years later๐ I decided to paint them white and I am so very pleased with the results!We bought a new house with these ugly cabinets. I really cann... See more
Yes no problem
What you can do is a little cheating using craft paints and texturing tools to make it look like the surrounding area. Let it dry then put a sealer over it so it will not rub off over time. Do not pledge over it just dry dust. this works. I used to do stuff like this on certain things for a living. I won't say what.
You certainly can use stain but it will not make the filler disappear. If you don't care for the appearance you could possibly drill where the filler is to make the plugs more even and incorporate them into a design.
Yes, but they might absorb the stain darker than the surroundings, and you'll have dots and gouge-shaped markings. If the top is wood (I'm assuming) and you don't like the dots and gouge shapes, you can use use water-clean-up paint and a very fine tipped brush, (and your innate DIY skills) to blend the dots and gouges into the grain, or make them more irregular, like natural knotholes. If you don't like the end result, water-based paint can be removed by acetone even after it dries. NOTE: Water-based paint (or even just water) can darken raw wood, but the oil-based stain will protect the wood, so do this after, not before, you stain. I had an antique table that was my grandmother's, but it had cigarette burnholes that I had to sand out, fill, and blend in, and it turned out pretty good if I do say so myself, and it was fun.
Hi Shawn. Most wood fillers are stainable. Good Luck!