I know that experts say that water heaters should be drained once a year to prolong their life span..
I like to do preventive maintenance whenever possible. What is the process? I envision connecting a water hose and seeing 40 gallons of water flow into my backyard and the yard of my neighbors. I do not want a flood!
-
3po3 on Dec 04, 2011That's about the extent of it. Your water heater manufacturer may have specific advice, but here is a nice general step-by-step guide with good photos etc. http://www.diynetwork.com/how-to/how-to-drain-a-water-heater/index.htmlHelpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 04, 2011The process is simple. You do not turn off the water to the heater and just drain it. This will not remove any real sediment doing it this way, Simply take a old short washer hose and a five gallon bucket. while the water is on to the heater using gloves so you do not scald yourself place hose in bucket, connect to hose bib on heater. Turn on bib and fill bucket until no more sediment comes out. Might only be one gallon, or may take several gallons. The reason why you keep the water on is it helps flush the bottom as it fills when draining. Once done turn off water drain and remove hose. If the hose bib continues to drip, and it often does. Do not over tighten it in an attempt to stop this drip. It will not work. Go to any hardware store and purchase a hose bib cap. Cost about $1.50 Put it one valve and your done. If the hot water heater was around 10 years old I would suggest against it at that time. As the heater ages the sediment builds up on the inside. It displaces any water that would normally be in contact with the bottom of the heater. These little dots of debris sometimes allows the heater to overheat those areas and for the lack of a better explanation burns holes into the bottom of the metal weakening it. When you flush after that has occurred. It is quite common to find leaks the next day. This happens a lot with older heaters when people move in to the home. They are in a cleaning mode using many more gallons of water then the heater may had seen for many years. All this additional water can flush the sediment around with the result of these little hot spots beginning to leak in short order.Helpful Reply
-
-
Alta M on Dec 05, 2011Thank you both very much!Helpful Reply
-
Related Discussions
Rocking chair
I bought this rocking chair 31 years ago when my son was born. It's time to do something with it. Looking for ideas.
How can I control blind mosquitos?
I retired and moved to Florida. I live by a lake. We get a lot of blind mosquitos. I don't like using chemical sprays. I don't want to hurt the wild life. Look... See more
How do you seal wood ceilings to prevent dust from coming through?
We are remodeling a home built in 1912. When we removed the ugly drop ceiling, it has beautiful wood ceilings. We would love to keep the ceilings in some rooms but ... See more
If I put bleach in my fountain to kill mosquitos will it harm the bird
Which mosquito repellent plants can grow up a trellis?
I am planting mosquito repellent plants around my patio and would like to grow one up a trellis as a privacy screen
How effective are bay leaves for ants?
I'm dealing with a terrible ant infestation, and I heard that bay leaves can be a great way to keep them away. Do you know if that's true? If it is, how can I use bay... See more
My toilet handle stays down when you flush and the water keeps running
how do I fix my running toilet?