Any thoughts on what type of plant tag/label will last the longest without needing re-writing?
-
3po3 on Mar 04, 2012There was a discussion of plant labels a few days ago, including engraving on metal and painting on glass. Either should last quite a while. Here is the conversation: http://www.hometalk.com/activity/143625Helpful Reply
-
-
Southern Trillium LLC on Mar 04, 2012Thanks Steve, I just posted the question on that discussion thread.Helpful Reply
-
-
Southern Trillium LLC on Mar 08, 2012Thank you for the suggestions but this doesn't answer my question because the linked thread was for different types of tags, but not necessarily a long lasting label/tag.Helpful Reply
-
-
3po3 on Mar 08, 2012As KMS said toward the bottom of that thread, the stamped metal tags should last forever. Not sure what you are looking for, if not that.Helpful Reply
-
-
Southern Trillium LLC on Mar 08, 2012I knew that stamping a metal tag will last indefinitely, but I just didn't know if there is any other tag/label that will provide a long life. Sitting down with a hammer and punch to create every tag would be very time consuming, but I know they will always be there. I guess I am also thinking of labels that will be easier for others to read as they walk by. I have heard people mention using grease pencils, or even laminated UV resistant labels, but didn't know just how long those might last. Hope this helps explain my question a little more.Helpful Reply
-
-
3po3 on Mar 08, 2012Yes, thank you. Unfortunately, I don't know of any other long-lasting options that you haven't considered. Maybe somebody else will have some.Helpful Reply
-
-
Becky Broadhead on Jun 29, 2015What I have done is using Popsicle sticks I write on them with a permanent marker and then enclosing the whole thing in packing tape. the tape prevents the wood from rotting and keeps the writing bright. You could also use anything that you can write on and cover with tape. They need to be totally enclosed with the tape.Helpful Reply
-
-
Carmen Evans on Jan 25, 2016I have used lightweight aluminium drink cans and you can cut them into label size with kitchen scissors or secaturs then imprint the plant name with the point of an old pen to make an indent into the aluminium, pierce a hole in it and tie it to the plant or dig into the groundHelpful Reply
-
Related Discussions
How do I take off hard water from my tub?
Here’s my issue I have been living in the same apartment building for 18 years and I have a tub that deals with hard water on a daily basis. What is the best way fo... See more
How do I remove paint from painted tile and tub?
How should I remove paint from a tile floor and a bathtub?
What can I use to stop flies from collecting on my new deck?
My deck is new , I was told flies are attracted to the sap of the wood,.
What could be causing a wet floor, if a plumber finds no leaks?
wet floor under sink dry iu and run water no leak? no smell all is clean. run water both tubs, garbage disposal, use sprayer everything underneath stays dry. Go away ... See more
How to hide a pool filter?
Looking to hide this very hideous area. Thinking of a portable coat rack that you use when you have company. Bc it has wheels and can be moved easily.We still have to... See more
How to install a smart thermostat on my furnace?
Furnace is a Slant/Fin VSPH-90 boiler. There are three thermostat terminals at the boiler end, but only two have wires connected to them (see photo). The two wires co... See more