20 years ago I built a stand alone garage and provided power by burying wires in a PVC conduit.
-
KMS Woodworks on Dec 20, 2011Is it possible to take a longer route to the garage that avoids the bedrock?...20 or 30 extra feet of wire may be less work than digging through stone. I ran power to my stand alone shed a few years back. I dug by hand and used an air chisel to bust up some of the harder rock areas. Its a bit like work but in the end worth it. As a landscaper do you have easy access to a trencher?Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 21, 2011You can run it above ground in conduit, perhaps along a fence line. But you cannot simply set it on the ground for risk of damage. If you had it dug under ground in the past and only roots were the issue. Simply cut the roots away.Helpful Reply
-
-
Nichter's Home Services Corp on Dec 21, 2011Renting a jackhammer is an option to remove ledge rock. The Bosch Brute electric is the most common. I don't recall exact details, but I believe the code has allowances for reducing required depth if you run in a conduit and pour concrete over the area of reduced depth. My sparky has done this a couple of timesHelpful Reply
-
-
KMS Woodworks on Dec 21, 2011I got to use one of those Bosch Jackhammers this year...first time...it made quick work of some concrete ....just be careful to keep it moving side to side...that tip can dig its way to China in no time.Helpful Reply
-
-
Nichter's Home Services Corp on Dec 21, 2011I owned one for years. Probably put over a thousand hours on it. Finally it owned me. I sold it before letting the arthritis get any worse. Never use a jack hammer with only one bit. When ( not if - when) you get the bit stuck, you have another to work in nearby to get it out. I did more rock and ledge than concrete. Crete is easy by comparison. The top 12-18" of ledge is usually more rotten rock that is fairly easy, as frost has generally loosened it over the yearsHelpful Reply
-
-
Greg Warren Flowers on Dec 22, 2011Have you checked to see if a heavy metal "rigid" pipe is acceptable?? We were able to use this and pass code at a more shallow depth...the other option they gave us was to encase under concrete, ugh.Helpful Reply
-
-
Rohe's DPS Inc on Dec 23, 2011Thank you all. In speaking with the solar company that will do the installation we will make the decision on whether to utilize existing conduit and pull a new wire using the existing cable. It requires burying that conduit that roots brought up. He liked that idea better than a new cable through the house to a point within 25 feet of the garage. Busting the granite that we have here is not an option so if the existing plastic conduit cannot be buried to depth the only options are a steel conduit that only needs 6 inches or go through the attic and across. Thank you all, it helped direct the discussion with the solar contractor. DanHelpful Reply
-
Related Discussions
Can you make your own rain gutters?
I'm interested in creating homemade rain gutters for the second-floor balcony of my house, and I'd love to learn from your knowledge. Can you please share your DIY ra... See more
How do keep the plastic on solar lights from clouding over?
i have solar lights in my yard and i'm wondering how i can keep the sun from clouding the "glass" covers? the lights look so pretty!!! thnx!!!
How can I refresh an old ugly lampshade?
How can I refresh an old cloth lamp shade that has just gotten stained & ugly over the years. The shade is a strange shape so I need an easy solution. Any ideas? Than... See more
What are your most dreaded household chores?
Let's face it, household tasks are a part of life, but that doesn't mean we have to love them, right?We all have those duties that we'd rather avoid at all costs. So,... See more