can a moen posi temp shower n tub be changed out to a Delta shower n tub assembly? Without having to cut/tear out wall
-
KMS Woodworks on Feb 14, 2012In nearly all of the retros I've done I rework the supply and returns which normally lie outside the 5-6" hole that the valve comes through. If you have access to the back of this wall you may not need to mess with the tile.Helpful Reply
-
-
HandyANDY - Handyman & All Repairs, LLC on Feb 14, 2012Hopefully you are lucky and you have a closet directly behind the tub...if you do, get the larger Oakly plastic access panel from Lowes or Home Depot and cut yourself the access you need through the drywall. You can then install the panel with two screws & you'll have permanent access to the area without bothering with your shower tile. We use these alot and you can paint them to match the wall.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 14, 2012Just like KMS said. You will need to open the wall to do the plumbing. The size of this demo would be determined by the quality of the plumber and his or her experience in doing this type of work. There are several custom retrofit covers with over sized plates that can be used when doing this type of valve change. Check with the plumbing and bath supply store, your not going to find this at your local big box store.Helpful Reply
-
-
Baby H on Feb 14, 2012Hmm well there is no access panel so it sounds to me like I have to stick with a Moen posi temp assembly. Thanks everyone.Helpful Reply
-
-
KMS Woodworks on Feb 15, 2012If the valve is leaking or not working well, just a "cartridge" swap will usually do the trick. Swapping out the valve "body" would be just as invasive as a complete new installHelpful Reply
-
-
HandyANDY - Handyman & All Repairs, LLC on Feb 16, 2012What's behind the shower?Helpful Reply
-
-
Baby H on Feb 16, 2012KMS at the moment the shower assembly is working fine although very worn. The bathroom faucet and vanity top has some serious wear an tear and I'm going to change out the top and faucet. The shower and tub assembly is worn but works. Since I was going to replace and update the vanity area I wanted to go from the old "GOLD" faucets to brass in the shower area also. To keep it matching HandyAndY the Garage. ThanksHelpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 16, 2012Baby H, If the garage is behind the shower area it is not difficult to cut out and replace the Sheetrock on that area of the wall. Unless of course you have all sorts of cabinets etc on the wall. Have you thought about doing it this way? Also you can install a access panel when removing the wall board that you need to gain access. This will allow you in the future to regain access to that area should you ever need to address the faucet issue again.Helpful Reply
-
-
KMS Woodworks on Feb 17, 2012You might be able to get a "new" knob and trim kit to make it look new. Swapping out a spout is pretty easy too.Helpful Reply
-
-
Baby H on Feb 17, 2012KMS I went to their website once I got a few questions thrown at me asking about what type it was etc. So supposedly if you get the same type you have installed but just a different style/color I should be fine. I will see. Woodbridge it is in the cuby whole area where there are a few shelves so I won't want to go that way unless one day truly breaks/leaksHelpful Reply
-
Related Discussions
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
Patio umbrella keeps blowing over
Does anyone have a easy solution to keep opened patio umbrella from flying up and falling over even on a semi windy day? I have the heavy base, it's in a hole in a pa... See more
How can I remove labels from coffee cans so I can upcycle them?
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more
How do you remove an oil stain from composite decking?
I moved a snow blower to my composite porch for the up coming winter. After it was moved I noticed it had dripped engine oil on the deck and it soaked into the compos... See more
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?