Painting
-
Cynthia on Jul 04, 2013http://www.wikihow.com/Paint-Laminate-FurnitureHelpful Reply
-
-
Color Expressions Painting on Jul 04, 2013Clean the surface and apply an Alkyd Bonding primer. This will ensure adhesion of the paint to the surface. Then apply 2 coats of Ben Moore " Advance" Alkyd paint in the color of your choice. Use a mohair roller (doesnt shed) and you will get a beautiful surface that is very durable. If you dont have a Benjamin Moore store near you, you can use Sherwin Williams Pro Classic. Again, you want their Alkyd paint and primer. They also sell the mohair rollers.Helpful Reply
-
-
Donna keller on Jul 04, 2013I'll do it ThanksHelpful Reply
-
-
Patricia Presto/On The Surface on Jul 05, 2013I heard Styx is a great primer for this type of project. I just used this for the first time on a cabinet job - and it had some bleed through from grease. When I went to the store to ask about it - they said that Styx would "stick" to anything but it was not a stainblocker. I bought mine at Ben Moore but I think Lowe's carries it as well. The tough part of your job is getting the paint to hold. Sand and use the best primer you can find for your particular circumstance or else you will run into heartache as I just did on my cabinet job by not reading the label and asking questions! Good Luck!Helpful Reply
-
-
Traci on Jul 06, 2013I just finished painting my kitchen island with Sherwin Williams Pro Classic (mentioned above) and I loved it. It dries quickly and I have had no trouble with the drawers sticking to the frame. I use The Gripper Primer and I find it bounds well to all surfaces. Good luck with your project. TraciHelpful Reply
-
-
Jeffrey Whitmer on Jul 07, 2013I use XIM top of the line, black label waterborne primer for laminate, Not for anything finished with oil based paint. Lot easier to work with. Scuff up surface with sandpaper/or pad. Wipe down with denatured alcohol (won't leave any film) and spray the primer and the finish I have known it to pass the scratch test as soon as a half hour on laminate. It It has become easier for a homeowner to acquire an affordable sprayer. Cup gun, HVLP, or just a few(or a lot) of spray paint cans! Finish with some clear urethane and it will protect against scratches. An urethane alkyd/oil topcoat will get you harder surface which makes it easier to clean, more durable. Don't try to cover previously painted solvent based finishes (oil based), for these you need an oil based primer too. More at http://www.jjwpainting.com. Dynamic Daytona Beach Painter.Helpful Reply
-
Related Discussions
Trail of dead grass mystery?
Trail of dead grass appeared two weeks ago that starts in neighbor's yard and goes to the sidewalk, then continues past the sidewalk in a line into the grass into my ... See more
What is your favorite season: spring, summer, winter, or fall?
Let's chat about our favorite seasons!Whether you're a summer lover, a fall enthusiast, a winter aficionado, or a spring admirer, we want to know: What's your favorit... See more
My toilet handle stays down when you flush and the water keeps running
how do I fix my running toilet?
How do you get rid of fruit flies from the soul of your plant?
There are fruit flies all over my plants.
Fruit flies in my office- Do I need to find the source?
My office has a ton of fruit flies. I'm not sure where they are coming from and how to get rid of the fruit flies. The garbage cans are all clean. We have some new pl... See more
How to get rid of fruit flies in my plants?
How to get rid of fruit flies in my plants?
I have flies can't get rid of them.no food left out. No fruit. Really
I have fruit flies and can't get rid of them. I don't even have any food or fruit out.